Qolsys IQ Panel 2 Plus AT&T LTE, Honeywell/2GIG Compatible Frequently Asked Questions
Does the Qolsys IQ Panel 2 Support The Use of Prox Tags?
Yes, the IQ Panel 2 Plus supports prox tags in firmware 2.5.3 and higher, but only if a Visonic PowerG KP141 or KP241 is present. Read on for full details.
Qolsys IQ Panel 2 Plus Vs. Qolsys IQ Panel 4
Qolsys IQ Panel 4 is growing in popularity. You may wonder if it is time to replace your IQ Panel 2 Plus. Keep reading for a comparison between these panels.
How Do I Integrate a LiftMaster MyQ Garage Door to a Qolsys IQ Panel 2 Plus?
Follow the steps to install the LiftMaster MyQ Garage Door Controller and integrate it with Alarm.com. Be sure the Garage Door & Gate Control feature is enabled. Keep reading!
How Do I Add a Duress Code Using the Alarm.com Customer App?
Alarm.com allows users to configure a Duress Code using the Alarm.com customer app. When a user disarms using the Duress Code, a silent alert is sent to monitoring. Learn more.
How Do I Set Up Multi-System Access to Alarm.com Using the Mobile App?
Alarm.com allows you to set up access to multiple security systems from one login username. Learn how you can set up multi system access for Alarm.com from the mobile app.
How Do I Use the Honeywell 5800C2W With a Qolsys IQ Panel 2 Plus?
The 345 MHz version of the IQ Panel 2 Plus can support the Honeywell 5800C2W. It is great for taking over existing hardwired sensors. Learn to use the 5800C2W with the 345 MHz IQ2+.
Qolsys IQ Panel 2 Plus Vs. Honeywell PROA7PLUS
Two of the most popular security systems are the Qolsys IQ Panel 2 Plus and the Honeywell PROA7PLUS. See the differences between them so you can decide which is right for you.
How Do I Set the Installer Code Back to Default On a Qolsys IQ Panel 2 Plus?
The default Installer code for an IQ2+ is 1111. You can manually set this code back to 1111, or you can factory default the system. Learn how to reset the default IC on your IQ2+.
Why Does My Qolsys IQ Remote Often Disconnect From My IQ Panel 2?
If you find that your IQ Panel 2 is struggling to maintain connectivity with an IQ Remote Keypad, then there are some things you can check. Learn to improve IQ Remote reliability.
Why Aren't My PowerG Sensors Working After Replacing My IQ Panel 2 Plus?
When replacing an IQ2+, you must follow a special process to sync PowerG Sensors and fix the "Not Networked" condition. Learn to fix the "Not Networked" error for PowerG Sensors.
Yes, the IQ Panel 2 Plus supports prox tags in firmware 2.5.3 and higher, but only if a Visonic PowerG KP141 or KP241 is present. Read on for full details.
Added:
Qolsys IQ Panel 2 Plus Vs. Qolsys IQ Panel 4
Qolsys IQ Panel 4 is growing in popularity. You may wonder if it is time to replace your IQ Panel 2 Plus. Keep reading for a comparison between these panels.
Added:
How Do I Integrate a LiftMaster MyQ Garage Door to a Qolsys IQ Panel 2 Plus?
Follow the steps to install the LiftMaster MyQ Garage Door Controller and integrate it with Alarm.com. Be sure the Garage Door & Gate Control feature is enabled. Keep reading!
Added:
How Do I Add a Duress Code Using the Alarm.com Customer App?
Alarm.com allows users to configure a Duress Code using the Alarm.com customer app. When a user disarms using the Duress Code, a silent alert is sent to monitoring. Learn more.
Added:
How Do I Set Up Multi-System Access to Alarm.com Using the Mobile App?
Alarm.com allows you to set up access to multiple security systems from one login username. Learn how you can set up multi system access for Alarm.com from the mobile app.
Added:
How Do I Use the Honeywell 5800C2W With a Qolsys IQ Panel 2 Plus?
The 345 MHz version of the IQ Panel 2 Plus can support the Honeywell 5800C2W. It is great for taking over existing hardwired sensors. Learn to use the 5800C2W with the 345 MHz IQ2+.
Added:
Qolsys IQ Panel 2 Plus Vs. Honeywell PROA7PLUS
Two of the most popular security systems are the Qolsys IQ Panel 2 Plus and the Honeywell PROA7PLUS. See the differences between them so you can decide which is right for you.
Added:
How Do I Set the Installer Code Back to Default On a Qolsys IQ Panel 2 Plus?
The default Installer code for an IQ2+ is 1111. You can manually set this code back to 1111, or you can factory default the system. Learn how to reset the default IC on your IQ2+.
Added:
Why Does My Qolsys IQ Remote Often Disconnect From My IQ Panel 2?
If you find that your IQ Panel 2 is struggling to maintain connectivity with an IQ Remote Keypad, then there are some things you can check. Learn to improve IQ Remote reliability.
Added:
Why Aren't My PowerG Sensors Working After Replacing My IQ Panel 2 Plus?
When replacing an IQ2+, you must follow a special process to sync PowerG Sensors and fix the "Not Networked" condition. Learn to fix the "Not Networked" error for PowerG Sensors.
Added: