WBOX 0E-SNGPR433

The WBOX 0E-SNGPR433 is a 433 MHz wireless door and window sensor with a small footprint. DSC alarm panel users who need a door and window contact sensor can get exactly what they need with the 0E-SNGPR433. This is a wireless surface-mount sensor that fits in nicely with virtually any home decor. It is sleek and compact, making it nearly invisible once installed.

The 0E-SNGPR433 measures 2.2"L x 1.0"W x 0.3"D. There are small indications to determine which side of the sensor to place the magnet. This will assist in properly aligning the magnet. The 0E-SNGPR433 allows for a maximum gap spacing of 1". The magnet is sensed by an internal reed switch. The switch will indicate a faulted or open sensor when the magnet is outside of the 1" magnet spacing gap.

It will also provide a convenient blue LED to indicate proper magnet alignment. The LED will also flash green when the signal transmits. This built-in LED is only used in the first 15 minutes after installing the battery or installing the cover. Afterwards, the LED will only illuminate red upon a low battery condition. The sensor uses a Panasonic CR2032 coin battery, and is recommended to be replaced with the same.

The WBOX 0E-SNGPR433 is best added to the panel via the auto-enrolling method. See your specific alarm panel's instructions for details. This will learn in its unique serial number and the proper loop number. When auto-enrolling, be sure to remove and replace the magnet versus opening the cover. Opening the cover will enroll the loop that is associated with the tamper and not the magnet/reed switch loop. This will cause the sensor not to work properly. When enrolling with the magnet, the tamper loop will automatically work and does not require it to be learned separately. If you need a new DSC compatible 433 MHz sensor, then the WBOX 0E-SNGPR433 could be a more than adequate solution.

If you like this type of sensor but need one for a different panel, we have it available in a 2GIG 345 MHz or 319.5 MHz version.

Specifications

• Manufacturer: WBOX
• Sensor Type: Surface-Mounted Contact
• Operating Frequency: 433 MHz
• Operating Temperature: 32°F to 120°F (0°C to 50°C)
• Communication: Non-Encrypted Wireless
• Sensor Dimensions: 2.2"L x 1.0"W x 0.25"D (55.9mm x25.4mm x 6.35mm)
• Sensor Weight: 0.4 oz (11.34g)
• Magnet Dimensions: 1"L x 0.25"W x 0.25"D (25.4mm x6.35mm x 6.35mm)
• Maximum Magnet Spacing Gap: 1" (25.4mm)
• Mounting Methods: Screws or Adhesive Foam Tape
• Hardwired Input: No
• Battery Type: One (1) Panasonic CR2032
• Relative Humidity: 95% non-condensing