The WBOX 0E-SNGPR319 is a small form factor wireless sensor that is compatible with Qolsys, ITI, and Interlogix/GE's 319.5 MHz protocol. The WBOX 0E-SNGPR319 measures a mere 2.2" x 1.0" x 0.25" and has a maximum gap spacing of 1". It also has a multi-color LED that lights blue when the magnet is aligned properly. It will provide a green indication for transmitting a signal and a red for low battery. The blue and green LED only activate in the first fifteen (15) minutes after installing the battery or replacing the cover.
The 0E-SNGPR319 is a single zone mini transmitter. The sensor has a small footprint that mounts on the door or window frame and the magnet mounts within 1" of the sensor on the door or window. The sensor does not work well with foil wallpaper or around a lot of metal or electrical wiring. The sensor and magnet can be mounted using the supplied double-sided tape or with screws.
The 0E-SNGPR319 should be auto-enrolled into your control panel. Please refer to your specific alarm panel's instructions for exact steps. Learning in the sensor involves putting your alarm in auto-enrollment mode and moving the magnet away from the sensor, in the same manner it will be used. You should not learn it in by opening the cover, as this will cause the sensor not to work properly. The magnet when within the 1" gap spacing, allows the internal reed switch to close the sensor. When the magnet is moved away the reed switch it causes an open and sends the signal to the controller.
If you need a window or door sensor on a 319.5 MHz wireless alarm panel, then the WBOX 0E-SNGPR319 is a nice option. Popular panels that use this frequency is the 319.5 version of the IQ Panel 2/2+, IQ4 Hub, IQ Panel 4, and IQ Pro. The PROA7PLUS with a PROTAKEOVER module that is set for three (3) which is the 319.5 MHz setting. If you like this type of sensor but need one for a different panel, we have it available in a 2GIG 345 MHz or DSC 433 MHz version.
- Manufacturer: WBOX
- Sensor Type: Surface-Mounted Contact
- Operating Frequency: 319.5 MHz
- Operating Temperature: 32°F to 120°F (0°C to 50°C)
- Communication: Non-Encrypted Wireless
- Sensor Dimensions: 2.2"L x 1.0"W x 0.25"D (55.9mm x25.4mm x 6.35mm)
- Sensor Weight: 0.4 oz (11.34g)
- Magnet Dimensions: 1"L x 0.25"W x 0.25"D (25.4mm x6.35mm x 6.35mm)
- Maximum Magnet Spacing Gap: 1" (25.4mm)
- Mounting Methods: Screws or Adhesive Foam Tape
- Hardwired Input: No
- Battery Type: One (1) Panasonic CR2032
- Relative Humidity: 95% non-condensing