Alarm.com ADC-RME101 - Mounting Instructions

Mount an ADC-CSVR126 to a rack
The ADC-CSVR126
can be mounted to a standard server
rack using the ADC-RME101 rack mount kit (sold separately).
The rack mounts are designed to fit into a 1U (rack unit) area.
Note
: A rack unit is 1.75 inches/44.45 millimeters tall. Width and depth can vary.
The ADC-RME101
is available for
purchase on the Partner Portal.
In the box
•
Mounting brackets (x2
— one for each side)
•
Screws (x6 — three for each bracket)
Required hardware
•
ADC-CSVR126
•
ADC-RME101
•
Standard server rack
•
Server rack screws
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Stream_Video_Recorder_(SVR)/M...
Updated: Mon, 04 Oct 2021 15:35:13 GMT
1 To mount the ADC-CSVR126 to a
rack:
Note
:
The brackets are identical and can be attached to either side.
1.
Line up the three small holes on the mounting bracket
with
one side of the
ADC-CSVR126.
2.
Using the included screws, attach the bracket
to the ADC-CSVR126.
3.
Repeat the previous steps on the opposite side of the ADC-CSVR126.
4.
Using server rack screws, attach the ADC-CSVR126 to each side of
the server rack.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Stream_Video_Recorder_(SVR)/M...
Updated: Mon, 04 Oct 2021 15:35:13 GMT
2