Alarm.com ADC-V731B - Data Sheet - Dated 2025/09/22

Overview


Alarm.com’s battery-powered camera (ADC-V731B)

is perfect for installations where wiring is not an option.
Energy-saver Video Analytics captures clips and
snapshots whenever a person, vehicle, or animal is
detected, but conserves battery when there is no
activity. Familiar Vehicle Analytics alerts customers only
to known or unknown cars, while an integrated
spotlight, two-way audio, and Perimeter Guard®
proactively deter unwanted behavior. For power,

the V731B has a removable, rechargeable battery and
works with solar panels so customers have multiple
ways to charge.
Alarm.com

4MP Indoor/
Outdoor Battery
Spotlight Camera
Key Features
• 4MP HDR video
• Battery Saver Analytics with Person, Animal,
and Vehicle Support
• Spotlight Enabled Color Night Vision
• IR night vision
• Multi-Month Battery Life
• Solar Panel Compatible
• Hubless
Included Accessories
• USB-C charging cord
• Wall Mount
www.alarm.com
© 2025 Alarm.com. All rights reserved. 250917
ADC-V731B
DATA SHEET Specifications


Supported resolutions:


2688x1520, 1920x1080, 1280x720, 640x360

Recording compression:


H.264

Ingress protection:


IP65

Field of view:


140º Horizontal, 90º Vertical

Wi-Fi connectivity:


2.4 GHz and 5 GHz Wi-Fi 5 (802.11ac)

Battery capacity:

6450mAh


Charging time:

Less than 5 hours

Power adaptor:

20W USB-C Charger Capable of 12V

Output Recommended


Connector:

USB-C

Motion detection mechanism:

Passive infrared sensor

Image sensor:

1/3" Color CMOS

IR range:

Up to 15 feet (5 meters)

Image adjustments:

Flip, brightness, contrast, saturation,
sharpness, exposure

Operating temperature:


-4°F to 113°F (-20°C to 45°C)

Operating humidity:


20% - 100% non-condensing RH

Compliance:


FCC, IC, CE, & RCM


www.alarm.com
© 2025 Alarm.com. All rights reserved. 250917
Status light guide


Off:


Power off or standby

Blinking yellow:


Power cycling

Solid red:


No local or Intenet connection

Blinking red:


Power on, camera booting


Alternating red and green:

Reverting to factory default settings


Alternating blue and green:

Firmware updating




Solid green:


Connected to Alarm.com

Blinking green:


Local network connection

Solid blue:


Low Battery


Blinking blue:


WPS mode


Blinking white:


Wi-Fi Access Point mode and Bluetooth
Network Association modes

In-unit charging


Alternating yellow and green:


Charging

Solid green:


Charged and connected to Alarm.com

Alternating blue and yellow:


Charging failed


Battery pack charging


Solid red:


Charging

Solid blue:


Charged and connected to Alarm.com

Alternating blue and red:


Charging failed