Alarm.com ADC-VACC-729-JB - Installation Instructions

4MP Outdoor Floodlight Camera (ADC-V729/V729AC/VC729P) -
Junction Box Installation Guide
The junction box mounting accessory for the 4MP Outdoor Floodlight Camera (ADC-V729/V729AC/VC729P)
delivers
greater install flexibility across various surfaces. The junction box fits between the camera base and the wall for a
secure, watertight seal. It can be ordered from the Partner Portal
via SKU: ADC-VACC-729-JB.
For more information about installing the camera, see
4MP Outdoor Floodlight Camera (ADC-V729/V729AC/VC729P) -
Installation Guide
.
Note
: The junction box is designed to be installed on a flat wall/ceiling surface.
To install the junction box:
Important
: Prior to installation, verify the wall or ceiling can support the combined weight of the junction box and the
camera.
1.
Drill holes and mount the junction box to the wall with the included wall screws. If necessary use the included
anchors for additional support. If mounting on an exposed wall, verify
the conduit hole is on the bottom.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/4MP_Outdoor_Floodlight_Camera_(ADC...
Updated: Wed, 22 Apr 2026 16:55:30 GMT
1 2.
Mount the mounting bracket (included with the 729) to the junction box with the included screws.
3.
Route and plug in 729 wires.
Note
: For more information about how to plug in the wires, see
Wire, mount, and power the ADC-V729/V729AC/
VC729P
.
4.
Attach camera to mounting bracket. Ensure both screws are firmly screwed in to ensure tight seal.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/4MP_Outdoor_Floodlight_Camera_(ADC...
Updated: Wed, 22 Apr 2026 16:55:30 GMT
2 https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/4MP_Outdoor_Floodlight_Camera_(ADC...
Updated: Wed, 22 Apr 2026 16:55:30 GMT
3