Altronix SMP3 - Data Sheet

Description
Altronix
SMP3 power supply/charger converts a low voltage AC input into a 6VDC,
12VDC or 24VDC output. This unit has a wide range of applications for access con-
trol, security and CCTV system accessories that require additional power.
SMP3
Power Supply/Charger
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
Rev. SMP3 - 02262019
Input
Voltage
16VAC to 28VAC.
Outputs
Voltage
6VDC, 12VDC or 24VDC selectable.
Current
2.5A continuous max.
Other
Short circuit and thermal overload protection.

Filtered and regulated.
Back-up Battery

(not included)
Type
Sealed lead acid or gel type.
Failover
Upon AC loss, instantaneous.
Indicators (LED)
Input
Input voltage is present.
DC Output
Powered.
Physical and Environmental
Dimensions (L x W x H)
3.5” x 3” x 2” (88.9mm x 76.2mm x 50.8mm).
Product Weight
0.25 lbs. (0.12 kg).
Shipping Weight
0.35 lbs. (0.16 kg).
Temperature
Operating

0ºC to 49ºC (32ºF to 120ºF).
Storage

-20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity
85% +/-5%.
BTU/Hr (approx.):


6VDC:
8 BTU/Hr.


12VDC:
15 BTU/Hr.


24VDC:
31 BTU/Hr.

Mounting hardware included.
Specifications
SMP3
Board Dimensions (L x W x H) and Drawing
3.5” x 3” x 2” (88.9mm x 76.2mm x 50.8mm)
0.35”
(8.9mm)
0.16”
(4mm)
Ø0.156”
(3.9mm)
2.75”
(69.9mm)
2.25”
(57.2mm)
3.0”
(76.2mm)
3.5”
(88.9mm)