Honeywell 5870API Quick Install Guide

5870API Wireless Indoor Asset Protection Sensor Quick Intallation Guide
Step 1. Select Location
Paintings

Gun Case/Safe

Large Screen TV Jewelry Box Valuables Computers

Avoid sources of vibration (i.e. speakers, fans, motors) Choose a stable, clean, flat surface Mount in an inconspicuous area

Step 2. Select Operating Mode
LOOP 1 is for High Security (Fast Trigger) applications and should ONLY be used if the asset will NOT be subject to external vibration. Loop 2 (Standard Security mode) should be used in most cases.
FAULT

LOOP 1
Painting 1-3 Seconds

LOOP 3

30

O

30

O

LOOP 3
NORMAL

OR

High Security (Fast Trigger) Mode (Loop 1)

MOUNT HORIZONTALLY ONLY (LOOP 3 ONLY)
Jewelry Box 30
O

LOOP 2
Large Screen TV 5-8 Seconds

Greater than 30

O

LOOP 3

Standard Security Mode (Loop 2)

Tilt Mode (Loop 3)
2. Enter Zone Number, Zone Type and Input Type at keypad

Step 3. Program Device
SENSOR TAB
PULL TO CONNECT BATTERY

Pull tab

Enroll Serial Number (press tamper switch)

1. Pull tab to activate battery

Enter Loop Number at keypad (use Loop 2 unless Fast Trigger or Tilt is required) Peel here (Asset) Mounting Surface

Step 4. Install Device

2. Peel tape backing before installing. Place onto asset.

4. Press down firmly for five seconds.

Step 5. Test System

1. Clean mounting surface 3. Rotate into position
L/5870APIQIGF/D March 2009 © 2009 Honeywell International Inc.