Honeywell iGSMHS Data Sheet

Related Products

Honeywell iGSMHS - AlarmNet High Security Dual Path Alarm Monitoring Communicator
Honeywell iGSMHS
AlarmNet High Security Dual Path Alarm Monitoring Communicator

Document Transcript






Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP limitations, migration from POTS and global growth of broadband availability. The iGSMHS Digital Cellular Communicator offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, the on-board zone inputs make the iGSMHS compatible with other manufacturers’ security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

All signals are delivered to Honeywell’s AlarmNet® Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery. Honeywell’s iGSMHS High Security Communicator provides robust, reliable performance and meets the strict requirements of high security applications and UL line security standards. It is ideal for applications such as banks, jewelry stores, government buildings and other installations that require a 200-second communication path supervision rate to meet response demands.

• Line Security Approved for line security applications with required supervison interval • Full Contact ID or ADEMCO High-Speed Reporting Contact ID reporting using ECP mode with compatible Honeywell control panels. ADEMCO HS when using zone mode. • 256-bit AES Encryption Advanced encryption standard used for secure communications • Dual-Path Technology Combines Internet and GSM communication technologies • Upload/Download With select Honeywell control panels using GPRS. Requires Compass version or higher • Dynamic Signaling with Certain Honeywell Control Panels Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path. • Diagnostic LEDs Provide signal strength and status indications • QOS Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path • Web-Based Programming Allows complete interactive programming from AlarmNet Direct.

• Six Input Zones Universal control panel compatibility using zone inputs • Remote Services Capability* Optional Total Connect value-added web-based or SMS system control as well as e-mail notification of system events

*Service subscription required.

Mechanical • Dimensions: 8.4" H x 8.0" W x 1.5" D • Weight: 2.4 lbs with battery Electrical • Input Power: 9VAC, 15VA transformer, Honeywell Model No. 1332 • Backup Battery: 6V, 3.1AH, Honeywell Part Number K14139 (included) • Expected Battery Life: Five years (approx.) • Current Drain: 35mA average standby, 500mA peak transmit • Fault Relay Output: Open collector, 12VDC, .25W max. • Input Trigger Levels: (V+) 6V-13V, (V-) 0V-1V RF • Transceiver Type: Tri-Band GSM/GPRS Class 10 • Modulation: GMSK • Antenna: Internal GSM quad-band antenna 1.3 dBi gain Environmental • Operating Temperature: -4° F to 131° F (-20° C to 55° C) • Storage Temperature: -40° F to 167° F (-40° C to 75° C) • Humidity: 0 to 95% relative humidity, non-condensing • Altitude: To 10,000 feet operating; to 40,000 feet storage Listings* • UL985: Household Fire Warning System Units • UL1023: Household Burglar Alarm System Units • UL365: Police Station Connected Burglar Alarm Units and Systems • UL1610: Central Station Burglar Alarm Units • UL1635: Digital Alarm Communicator System Units

7720P Programmer K14139 Battery 1332 Transformer Two-Way Voice Audio Cable GSMV-AUDIO

iGSMHS Line Security Communicator
*UL/cUL Listed to the above standards. It is also suitable for Encrypted Line Security installations.

For more information: Automation and Control Solutions Honeywell Security Products Americas 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 1.800.467.5875

L/GSMHSD/D February 2012 © 2012 Honeywell International Inc.