Interlogix 60-807-01-95R - Data Sheet
Designed for use with all Interlogix control panels, the Indoor
SAW Passive Infrared (PIR) Motion Detection Sensor is a wireless,
battery-powered device that provides outstanding performance.
Featuring advanced signal processing, this detection device is
capable of eliminating the possibility of false alarms due to pets
weighing up to 40 pounds.
Well suited for both homes as well as small and mid-sized
businesses, the motion detector identifies the movement of a
person within a specific area by sensing the infrared energy
emitted from a body as it moves across the sensor’s field of view.
When this motion is detected, the sensor transmits an alarm
signal to the control panel.
• Pet immunity signal processing prevents false alarms
for homeowners with pets weighing up to 40 pounds
• Passive infrared detection senses movement within a
room by sensing the infrared energy (heat) emission from
a person as they move across a room
• Low battery reporting indicates when batteries need
replacing before they expire
• Cover tamper switch detects potential disablement or
damage to a sensor by an intruder
• Wireless and battery powered unit is easy to install
• Fully supervised device sends signal every 64 minutes to
the security panel to ensure uninterrupted performance
Standard Fe ature
Pet Immune SAW
Wireless PIR Motion Detector Indoor Wireless
SAW PIR Detector
Wireless PIR Motion Detector
Indoor Wireless SAW Passive Infared (PIR) Sensor
All wireless Interlogix control panels
Two AA Alkaline batteries
500 ft. open air
32 to 110ºF (0 to 43ºC)
90% relative humidity
2.9 x 2.4 x 1.9 in. (7.3 x 6 x 5 cm)
Specifications subject to change without notice.
© 2013 Interlogix.
All rights reserved.
Interlogix is part of UTC Climate, Controls & Security,
a unit of United Technologies Corporation.
305-3665 2013/06 (75039)