Interlogix ShatterPro Glassbreak Sensors - Data Sheet



Related Products

ShatterPro Glass Break Sensor, Transmitter Not Included
List Price:
Our Price: $57.99
ShatterPro Wireless Crystal Glassbreak Sensor
List Price:
Our Price: $94.99
Glass Break Simulator
List Price:
Our Price: $59.99

Related Categories


Document Transcript

interlogix.com
Intrusion
The Wireless ShatterPro

series, which is ideal for applications
where hardwired acoustic sensors are impractical, listens for actual
patterns of breaking glass using Pattern Recognition Technology.


These sensors feature a 20-ft. (6 m) range from sensor to glass.

The sensor is suitable for use in quiet occupied areas on the
perimeter loop.
For OEM applications, the sensor’s low-profile housing accepts

most wireless transmitters inside the back box. Each sensor

also ships with a mounting bracket that will hold larger transmitters.
The NX-488 or 60-873-95 are recommended if you prefer a

turn-key wireless acoustic sensor for use with Interlogix panels

(see ordering).
A simple hand clap feature lets the user confirm that the sensor is
operational, or a handheld tester can be activated at close range.
Overview
• 20-ft. (6 m) radius range and 360° coverage pattern protects

an entire room with one sensor
• Factory-set sensitivity for safer installation
• Test sensor operation with a hand clap
• Includes mounting bracket
• Recognizes actual pattern of breaking glass across the

full audio band
Standard Fe ature
S
ShatterPro

Glassbreak
Sensors
5845 series wireless acoustic
glassbreak sensors ShatterPr
o
Glassbreak Sensors
5845 series wireless acoustic

glassbreak sensors
North America
T 855-286-8889
Asia
T 852-2907-8108
Australia
T 61-3-9239-1200
Europe
T 32-2-725-11-20
Latin America
T 561-998-6114
interlogix.com
Ordering Information
584503-W
ShatterPro,

wireless, 3 V, with mounting bracket,
transmitter not included
584509-W
ShatterPro, wireless, 9 V, with mounting bracket,
transmitter not included
NX-488
ShatterPro, wireless, 319.5 MHz, crystal transmitter, compatible
with all NetworX panels, 5-year battery included
60-873-95
ShatterPro, wireless, 319.5 MHz, crystal transmitter, compatible
with all 319.5 MHz Learn Mode

panels, 5-year battery included
5709C-W
ShatterPro handheld glassbreak tester
Specifications
Voltage
3V sensor: 2.8 to 4.5 VDC
9V sensor: 6 to 16 VDC
Current
3V sensor: 17 μA typ.
9V sensor: 23μA typ.; 5 mA with LED on
Relay Output
3V sensor: Normally closed and normally open
9V sensor: Normally low with NPN transistor and 10
mOhms pull up resistor; normally high with PNP transistor
to power 16 VDC max.
Resistance, normal (closed)
700 ohms max.
Resistance, alarm (open)
10 mOhms min.
Alarm Duration
4 sec.
Transmitter Options
Models: NX-488; 60-873-95
Battery: Duracell DL 123A 3 V lithium, 5 years typ.
Transmitter frequency: 319.5 MHz
Transmitter conditions: Alarm, tamper, low battery
supervisory
Glass Thickness
Up to 1/4 in. (6.4 mm) for plate, tempered, laminated and
wired glass
Min. Distance from Glass
4 ft. (1.2 m)
Range
20 ft. (6 m) x 360°
Microphone
Omni-directional 360° electret
Sensitivity
Factory set
Operating Temperature
14 to 120°F (-10 to 50°C)
RFI Immunity
20 V/meter from 1 to 1000 MHz
Dimensions (HxWxD)
Sensor: 3.13 x 4.24 x 1.70 in. (80 x 108 x 43 mm)
Bracket: 2.10 x 2.94 x 1.12 in. (53 x 75 x 28 mm)
Housing
Flame-retardant ABS plastic
Color
White
Mounting Location
Ceiling or any wall adjacent or opposite glass
Specifications subject to change without notice.
© 2013 Interlogix.
All rights reserved.
Interlogix is part of UTC Climate, Controls & Security,

a unit of United Technologies Corporation.
30
5-3661 2
013/06 ( 74
801)
Dimensional Diagram
4.24 in.
(1 08 mm)
1.7 0 in.
(43 mm)
3. 13 in.
(80 mm)
1.12 in.
(28 mm)
2.94 in.
(75 mm)
2. 10 in.
(53 mm)
4.24 in.
(1 08 mm)
1.7 0 in.
(43 mm)
3. 13 in.
(80 mm)
1.12 in.
(28 mm)
2.94 in.
(75 mm)
2. 10 in.
(53 mm)
Sensor module with back box
Sensor module with mounting bracket


Uploaded