Qolsys IQ Key Fob Quick Installation Guide

Convenience on a keychain
IQ FOB
QUICK INSTALL GUIDE
•
Lock button can arm in stay or away mode
•
Unlock disarms system
•
Up to 100’ range
•
Panic function
FEATURES
The IQ Fob is one of the easiest ways to use your system. Most people find themselves remembering
they haven’t armed their system as they get into the car, or are too busy carrying things to arm their
system from the IQ Panel.
The IQ Fob allows you to activate your system within 100’ of the IQ Panel, and has the hidden feature
of being able to activate an intrusion or “police” panic by pressing “Lock” and “Unlock” together for 3
seconds.
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
LEARN
INTO
PANEL
Document#: IQDW-QG-03-17

Revision#: 3/8/17
Issue Date: MAR 2017

Qolsys Product #: QS-131
0-P01
STEP
2
STEP
1
Press and hold
the arm and
disarm buttons
down for three
seconds to send
an emergency
panic signal to
the panel.
STEP
3
ARMING
YOUR
SYSTEM
DISARMING
YOUR
SYSTEM
STEP
4
SENDING A
PANIC
SIGNAL
Press the arm
button down
once until the red
LED lights up for
stay mode.

Press a second
time to arm away.
Press the disarm
button down
once until the red
LED lights up to
disarm the
system.
Place your panel in
“autolearn" mode
Customize name and settings
as desired and and touch “ADD”
ADD
+
Press and hold arm and disarm
buttons to “tamper” the device
TechSupport@Qolsys.com
CONTACT TECH SUPPOR
T
GOT QUESTIONS?
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
FCC ID: U5X-RF245-2
IC: 8310A-RE100
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute
interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.