Qolsys IQ Outlet (QZ2131-840) - Quick Install Guide - Dated 02/19/21



Related Products

Taxons
Qolsys QZ2131-840
Z-Wave Plus 700 Series Smart Outlet Plug-in Module
List Price:
Our Price: $39.99

Document Transcript

IQ OUTLET QUICK INSTALL GUIDE
• Turns ON/OFF incandescent, CFL, or LED lamps, and AC
operated appliances

• 700 Series Z-Wave module

• LED to indicate ON/OFF status

• Remotely or manually turns ON or OFF lights

• Controls appliances up to 15A

• Z-Wave Plus Certified with S2 security and SmartStart (QR
code on bottom of device)

• Grounded 3-pin AC power receptacle to enhance safety

• Safety tab to secure unit to AC outlet

• Compact design - does not block the 2nd AC outlet

• Supports Network Wide Inclusion (through a repeater)


Functions as a Z-Wave signal repeater


Indoor Use Only


Operating ambient temperature 0°C - 40°C


Purpose of control: Operating Control;


Construction of control: Portable Direct Plug In Type;


Type 1 Action;


Pollution Degree: 2


Impulse Voltage: 1500 V


Not Suitable for Appliances which only allowed to be
plugged into wall outlet or a single outlet circuit, such as
room heaters and window air conditioners.
SPECIFICATIONS
The IQ Outlet can be used to turn On or Off lamps or AC operated appliances. Each Z-
Wave device also serves as a node to repeat the signal in the network, thus, extending
the overall Z-Wave mesh wireless network range.

The IQ Outlet is a Z-Wave Plus® certified device and includes S2 security and
SmartStart. You can now add this device securely and with ease using QR code on the
product.

Use Locations:


Kitchen


Living Room


Basement


Bedrooms


Garage
FEATURES & OVERVIEW
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
WARNING
:
 
The appliance connected to this Z-Wave
module must not exceed 900W incandescent, 200W
CFL/LED, 1

2 horsepower motor and 15A, 1800W
resistive load, 120VAC 60Hz
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est
soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit
accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. ADD
STEP

2
DETERMINE
INSTALLATION
LOCATION
PREPARE THE
PANEL TO ENROLL
THE IQ OUTLET
STEP

3
PAIRING
WITH THE
IQ PANEL

Test device to ensure
proper function
Document#: IQSO-QG-01-21

Revision#: 02/19/21

Issue Date: FEB 2021

Qolsys Product #: QZ2131-840
Press the button on
the top of the IQ
Outlet once to enroll
with the IQ Panel.
STEP

1
Plug in the IQ Outlet
at desired location
Customize name
Complete pairing process
by touching
Add
Select “Add device”

from Z-Wave menu
Qolsys Inc. proprietary. Reproduction without permission is not permitted.
Responsible Party – US Contact
Information; Qolsys, Inc.

1900 The Alameda Suite 420

San Jose, CA 95126, United States
GOT QUESTIONS?
CONTACT TECH SUPPORT

intrusion-support@tycoint.com
INCLUDE
Press the

“Include” button
ADD
19
Outlet
Kitchen Outlet
Id
Type
Name
FCC ID: 2AMY9PS700
Supplier’s Declaration of Conformity; 47 CFR
2.1077 Compliance Information

Model: PS700
IC: 22968-PS700


Uploaded