Qolsys IQ Panel 2 & 2 Plus - Panel Firmware 2.7.1 Release Notes - Dated 06/17/22



Related Products

Taxons
Qolsys IQ Panel 2 Plus Verizon LTE, DSC Compatible
433MHz Wireless Alarm Panel w/ PowerG
Qolsys IQ Panel 2 Plus - AT&T LTE with PowerG, S-Line & Legacy Interlogix
Qolsys IQ Panel 2 Plus AT&T LTE, Interlogix/GE Compatible
319.5 MHz Wireless Alarm Panel w/ PowerG
Taxons
Qolsys IQ Panel 2 Plus AT&T LTE, DSC Compatible
433MHz Wireless Alarm Panel w/ PowerG

Document Transcript

TSB #:
220617

DATE:
06/17/22
RE:
IQ PANEL 2 & 2 PLUS - 2.7.1 SOFTWARE UPDATE
RELEASE NOTES & UPDATE INSTRUCTIONS
Release Notes:
Fixes/Improvements:

Fixed an issue where sometimes the cell connectivity path isn’t re-established after a panel software upgrade.

Addressed a use case where PowerG sensors could unexpectedly remain “Not Networked” after a panel reboot
or panel software upgrade.
Update Instructions:
Compatibility Note: Your IQ Panel must be on software version 2.0.1 or higher and connected to Wi-Fi to install
this update wirelessly. Panels running 2.5.0 & 2.5.1 must be updated to 2.5.3 first, then they can be updated
directly to 2.7.1
1- Swipe down from the top of the screen and touch “Settings"
2- Touch “Advanced Settings”

3- Enter a valid installer code (default is 1111)

4- Touch "Upgrade Software"
5 -Touch “Patch Tag” and enter the patch
iqpanel2.7.1
then touch OK

6- Touch "Upgrade Using Network" (panel must be connected to Wi-Fi).
 
Update will download and install

7- Once complete touch "OK" to reboot the panel.
 
DO NOT TOUCH THE SCREEN.

 
The update process will
take approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.
TECHNICAL SERVICE BULLETIN
IQ PANEL 2 & 2 PLUS - 2.7.1 SOFTWARE UPDATE - RELEASE NOTES AND INSTRUCTIONS


Uploaded