Resideo 4GLTE & IP Communicators - Data Sheet Dated 04/19

Document ID L/LTEIMPCD/D | 04/19
Honeywell Home End-to End Solutions
4 G LT E+I P
LTE and Internet Multi-Path
Communicators
Honeywell Home is focused on providing the best alarm
communication solutions for the security industry. Alternative
communication methods are critical in the marketplace due to
inconsistencies in VoIP, migration from POTS and the
evolution of cellular networks. LTE network connectivity
provides the longest viable cellular lifespan available.
All signals are delivered to the AlarmNet® Network Control
Center, which routes the information to the appropriate central
station. The state-of-the-art AlarmNet Network Control Center
is fully redundant and monitored 24/7. AlarmNet has the ability
to route messages using AlarmNet-i and 800 PLUS services,
providing true redundancy and multi-path message delivery.
FE AT URES
• 4G LTE network and IP
compatibility
• Full Contact ID

Contact ID reporting using
ECP mode with compatible
Honeywell Home control
panels.
• 256-bit AES Encryption

Advanced encryption
standard used for secure
communications.
• Upload/Download

Available with select
Honeywell Home control
panels. Requires Compass
version 1.5.8.54a or higher.
• Diagnostic LEDs

Provide signal strength

and status indications.
• QOS

Quality of Service
diagnostics via AlarmNet
supply vital information
including when a message
was received, battery
voltage, input voltage,
signal strength and

message path.
• AlarmNet360™ Online

Management Platform

Remote programming

and diagnostics to improve
business efficiencies

and reduce truck rolls.

www.alarmnet360.com
• Remote Services
Capability*

Optional Resideo Total
Connect Remote Services —
Boost RMR while providing
on-the-go security and
home control, video viewing,

and real-time alerts,
anytime, anywhere, on

any PC or smart device.
• FOTA Firmware Upgrading

Complete over-the-air
firmware upgrading
capability. Provides remote
service management ability.
• Dual Technology
Reporting

Provides IP and cellular
transmission paths

with added flexibility

and reliability.

(LTE-IV, LTE-IA, LTE-IC)
• Six Input Zones

Used for universal control
panel compatibility.

(LTE-IV, LTE-IA, LTE-IC)
• Built-in Power Supply/
Backup Battery
On-board charging circuit
design accommodates
back-up battery.

Includes primary power

and battery supervision.

6V 3.1Ah battery supplied
to deliver up to 24 hours of
standby operation.
*Service subscription required.
Alarm Communications L/LTEIMPCD/D | 04/19
© 2019 Resideo Technologies, Inc.
The Honeywell Home trademark

is used under license from

Honeywell International Inc.
All rights reserved.
Resideo Technologies, Inc.
2 Corporate Center Drive, Suite 100
P.O. Box 9040
Melville, NY 11747
1-800-645-7492
resideo.com
ORDERING
LTE SK U
Carrier
Panel

Compatibility
Replaced 3G/4G
CDMA Radio
Coming Soon

LTE-IA
AT&T
V I S TA -15P
V IS TA -20P
VISTA-128BPT
V IS TA -250BP T
(universal panel
compatibility using
zone inputs)
IG SMV4G
LT E- I V
Verizon
V I S TA -15P
V IS TA -20P
VISTA-128BPT
V IS TA -250BP T
GSMX4G/CDMA-X
U.S.
LTE SK U
Carrier
Panel

Compatibility
Replaced 3G/4G

Radio
Coming Soon

LT E- IC
Bell
V I S TA -15P C N
V IS TA -20PCN
VISTA-128BPTCN
V IS TA -250BP TCN
(universal panel
compatibility using

zone inputs)
IG SMV4G
Canada
For more information
security.honeywellhome.com/hsc
SPECIFICATIONS
VISTA 4G LTE

Multi-Path
Communicators
(LTE-IV/LTE-IA/
LT E- IC )
DESCRIPTION
• Multi-path IP and Cellular Technologies
• Integrated VISTA ECP design
• LTE CAT1
PANEL COMPATIBILITY
All VISTA® controls with ECP radio support.
Universal panel compatible using zone inputs.
DIMENSIONS
8.4" x 8.0" x 1.5"
(21.3cm x 20.3cm x 3.8cm)
ELECTRICAL
• Input Power:
16.5V AC, 40VA transformer,
Model No. 1361
• Backup Battery:
6V, 3.1AH
RF
Antenna:
Internal Penta-Band antenna with
receive diversity for LTE CAT1. Average 3.8dBi gain.
ENVIRONMENTAL
Operating Temperature:

-4° to 131° F (-20° to 55° C)
Storage Temperature:

-40° to 158° F (-40° to 70° C)
AGENCY LISTINGS
ETL Listed