VIVOTEK AM-412_V04 - Installation Guide

AM-412 Corner Mount - Prism Series Mount Installation Guide
Compatible Prism Series Cameras
Additional mounting accessories required
ADC-VC7398PA
ADC-VC8295P
AM-71C_V02 Waterproof Junction Box
ADC-VC8498PA
ADC-VC8498P
AM-218 Wall-Mount Bracket
AM-719 Outdoor Junction Box
AM-528 Large Pendant Cap
ADC-VC8295P
AM-218 Wall-Mount Bracket
AM-719 Outdoor Junction Box
AM-52E Small Pendant Cap
ADC-VC7398PA
N/A (direct installation)*
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:46:57 GMT
1 AM-412 Corner Mount Bracket
*Important
: The directly-attached installation configuration is less recommended due to the lack of built-in waterproofing
and cabling protection. If utilizing a direct installation, make sure to properly wrap the rear-end cables and connectors
with waterproof protection such as putties.
The AM-412 Corner Mount Bracket can be ordered through the Partner Portal's
Order Equipment page
.
In the box
•
AM-412 Corner Mount Bracket
•
M6X20mm screws (x4)
•
M5X20mm screws (x4)
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:46:57 GMT
2 •
M4X20mm screws (x4)
•
M4X15mm screws (x4)
•
M8 nut (x2)
•
Hex L wrench 5 mm
•
Hex L wrench 4 mm
Mechanical drawings
Pre-installation
If you are installing a dome camera, the camera's cowl must be removed in order to install the video device. Retain the
camera screws and cover for re-installation after cable routing and mounting is complete.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:46:57 GMT
3 Installation instructions
Note
: The following steps and images are examples of the general installation process.
1.
Combine the two metal pieces together using the M8 hex nuts and washers.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:46:57 GMT
4 2.
Align the assembled brackets with the desired position. Align the screw holes on the brackets against the wall.
3.
Drill holes in the wall for securing the bracket and for routing the cables.
4.
Hammer the anchors into the wall.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:46:57 GMT
5 Note
: These screws and wall anchors are not included, and must be user-supplied.
5.
Secure the conduit box (e.g., AM-719 or AM-71C_V02) to the bracket using the M5 screws, washers, and hex
heads. A hex crescent wrench is required.
AM-412, AM-71C_V02, and bullet camera
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:46:57 GMT
6 M5
AM-412, AM-719, AM-218, Adapter Plate, and dome camera
AM-218
Dome camera
A
M
-
5
2
8

/

AM-52E
AM-412
AM-719
Note
: These examples depict generic bullet and dome cameras. Alarm.com Prism Series Cameras will look
different when installed.
6.
For installation instructions for the AM-719 or AM-71C_V02, see:
◦
AM-71C_V02 Waterproof Junction Box - Prism Series Mount Installation Guide
◦
AM-218 Wall-Mount Bracket - Prism Series Mount Installation Guide
Note
: This Installation Guide includes steps to install the AM-719 along with the AM-218 for a compatible
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:46:57 GMT
7 setup.
Additional resources
•
For assistance with choosing the correct mounting accessories for your installation, see
Prism Series
Camera
Mounting Accessories
.
•
For steps and information about installing Prism Series Cameras, see
Prism Series Cameras - Installation Guide
.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:46:57 GMT
8