VIVOTEK AM-523 - Installation Guide

AM-523 Adapter Plate for Junction Box - Prism Series Mount Installation
Guide
Compatible Alarm.com cameras
•
ADC-VC7398PA
In the box
•
AM-523 Adapter Plate
•
Flat head countersunk screws #6 x 12 (x4)
•
Pan head M6 x 6 screws (x3)
•
Flat head countersunk #8 x 1/2" screws (x5)
AM-523 Adapter Plate
The AM-523 Adapter Plate can be ordered through the Partner Portal's
Order Equipment page
.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:59:07 GMT
1 AM-523 Adapter Plate mechanical drawing
Installation instructions
1.
Install the AM-523 Adapter Plate to the desired 4" junction box using the included screws as shown in the diagram
below.
Flat head
6# x12 NI
Countersunk head
8# x1/2 (drill point)
2.
Secure the camera mounting plate to the adapter.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:59:07 GMT
2 Important
: The camera's mounting plate is fully separated from the camera in this diagram solely for
illustrative
purposes. It is neither recommended nor required to separate the mounting plate from its camera
for
installations.
3.
Refer to the camera's Installation Guide for the rest of the installation instructions.
◦
For more information, see
Prism Series Cameras - Installation Guide
.
Additional resources
•
For assistance with choosing the correct mounting accessories for your installation, see
Prism Series Camera
Mounting Accessories
.
•
For steps and information about installing Prism Series Cameras, see
Prism Series Cameras - Installation Guide
.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Prism_Series_PoE_Camera...
Updated: Wed, 30 Sep 2026 21:59:07 GMT
3