Honeywell 951WG-M
3/8” Diameter Recessed Magnets
This product is not sold by Alarm Grid at this time. As an alternative, we recommend:
Description
The Honeywell 951WG-M is a 3/8” diameter recessed magnet which can be used with many of the Honeywell recessed door and window contacts including the Honeywell 951WG miniature press fit magnetic contact. The 951WG-M recessed magnet no longer comes in white unfortunately. If your door or window is white, and you just need the magnet, you will have to purchase the 951WG contact with magnet. If your door or window is brown though, the 951WG-M is the right piece for you.
You will need to drill a 3/8’ diameter hole in your door or window directly across from your recessed door and window contact so that you can press the 951WG-M magnet into the hole. You should make the depth of the hole equal to the length of the magnet so that the head of the magnet is flush with the edge of the door or window. We recommend installing your 951WG-M recessed door contacts horizontally instead of vertically so that the magnet does not accidentally fall out over time. If the hole you have drilled for the recessed magnet is too big for the magnet to sit snug, you can put a little glue around the magnet before inserting it into the hole.
When you use the Honeywell 951WG-M 3/8” diameter recessed magnet with the Honeywell 951WG miniature recessed door contact, you must make sure that the magnet is not further away than 3/4” from the contact when the door is closed. If you do not maintain a 3/4” magnet spacing gap between the 951WG-M magnet and the 951WG contact, your zone will stay in fault and you won’t be able to arm your security system.
Brand: Honeywell
Honeywell 951WG-M Compatible Products
