2GIG SDS1-345 Smoke Detector Sensor - Data Sheet



Related Products

Smoke Detector sensor for 2GIG wireless systems
List Price:
Our Price: $38.99

Related Categories


Document Transcript

Smoke Detector Sensor / Transmitter
Model #: 2GIG-SDS1-345
Traditional interconnected smoke detectors are designed to send audible alerts throughout the home if any
one of the units detects smoke - but they are not designed to communicate the event to an alarm panel. Now,
security installers can add a new layer of protection to a homeowner’s existing interconnected AC-powered
smoke detection system, by providing a professionally-monitored alert signal transmission when smoke is
detected by any or all of the interconnected, AC-powered smoke detectors. The 2GIG ‘Smoke Ring’ Smoke
Detector Sensor/Transmitter is the ideal solution to make homes even more safe & secure.
The 2GIG Smoke Detector Sensor/Transmitter (aka ‘Smoke Ring’) works in conjunction with traditional AC-
powered interconnected smoke detectors to communicate alerts to 2GIG (or other 345 MHz) alarm systems.
The 2GIG ‘Smoke Ring’ installs discreetly between the existing AC-powered smoke detector and the ceiling,
providing a clean, unobtrusive solution. Utilizing the same AC line current that powers the smoke detector,
the 2GIG ‘Smoke Ring’ will always be ‘on’ and, with a 7+ day battery backup, will even operate during a power
outage.
Only one Smoke Detector Sensor is required
in an interconnected smoke detection system.
Security
Panel
Smoke
Detector
Smoke
Detector
Only
SDS1
Smoke
Detector
Only
Features
• Installs between ceiling and existing AC-powered
interconnected smoke detector
• Converts traditional AC-powered interconnected
smoke detector systems to work with wireless
alarm panels
• Backup battery sends alarm transmissions in the
event of power failure
“The 2GIG Smoke Ring” Package Contents
• Smoke Detector Sensor
• CR2032 backup battery
• Mounting package included
Tested Compatible Smoke Detector Systems

• BRK Brands Model 7010B
• Firex Kidde Model i4618
• First Alert BRK Model 9120B
• Kidde Model i12040
• USI Electric Model 5304
Product Benefits
• Works with (existing) AC-powered interconnected
smoke detectors; providing whole-home coverage when
interconnected smoke detectors are employed in a
residence.
• Sleek mounting between existing AC-powered smoke
detector and ceiling with easy 3-wire connection.
• Only one sensor/transmitter is needed when used in
homes outfitted with interconnected, AC-powered smoke
detector systems. (No need to install multiple Smoke Ring
transmitters).
• Quick and easy installation using existing wiring and clip-
on connectors makes retrofitting a 2GIG ‘Smoke Ring’
onto an existing interconnected smoke detection system a
valuable offering for security dealers.
Specifications
Wireless Protocol/Freq.
2GIG & Honeywell / 345 MHz
Output Messages
Alarm
Low Battery
Tamper/Error
Supervisory
Backup Battery (included)
CR2032A or equivalent
Lithium batteries
Backup Battery Life
>3 years with AC power
>7 days without AC power
Operating Temperature
32°-104° F (0° - 40° C)
Relative Humidity
5-95% Non-Condensing
Weight
8.57 oz. (243g)
Certification
FCC, IC, UL 217, ULC S531
n

Please visit
2GIG.com
, or contact your local Sales Manager
.
P/N 10010895X4
© 2016 Nortek Security & Control LLC. All Rights Reserved
1950 Camino Vida Roble, Suite 150 • Carlsbad CA 92008 • 760.438.7000 • 760.800.421.1587
nortekcontrol.com
* This product has been tested and verified to operate with the above
interconnected, hardwired smoke detector systems. Other brand/
model smoke detector systems may also work with this product.
Model
Order PN
Compatible Alarm Panels
2GIG-SDS1-345
2GIG-SDS1-345
2GIG Alarm Panel, Honeywell 5800 Wireless Alarm Panels
7.00" Diameter
.437"
2GIG is a registered trademark of Nortek Security & Control, LLC. The Honeywell, BRK Brands, First Alert, Firex, Kidde, and USI names, logos, and brands are property of their respective owners.


Uploaded