2GIG TAKE100-345 - Data Sheet (2025)

The 2GIG
®
Wireless Hardwire Takeover Module provides
installers with an easy method for taking over a 12-volt
prewired security alarm system and coverting the existing
hardwired zones into 2GIG wireless technology.
The Takeover Module cannot be used to monitor Carbon
Monoxide (CO) or Fire detection zones and is intended

for indoor use only.
Please note that end-of-line resistor

is not supported.
The device transmits in nonencrypted mode by default,
and can be set to encrypted mode via an on-board switch.
Wireless Hardwire
Takeover Module
Security Sensor with On/Off
Switchable Encryption.
2GIG-
TAKE10 0
-345
2GIG products are known for quality and
field-proven reliability with more than 5 million
security panels and 25 million devices deployed
that boast a less than 0.03 percent failure rate –
the best in the industry.
SCAN ME
Discover more
about 2GIG

345S sensors
Complete 2GIG security
ecosystem.
345S sensors work with
the all-new GC Touch,
revolutionary 2GIG EDGE,
and earlier security &
control panels from 2GIG.
Stock half as many SKUs
on trucks.
Easily choose encrypted/

non-encrypted operation
with an internal switch.

2GIG 345S sensors work

for any installation. Frequency
345MHz
Input Voltage
16.5~20VAC
Backup Battery
Up to 12VDC 7AH
Dimension
3.53" (89.7mm) x 2.56" (65.0mm)

x 1.22" (31.0mm)
Weight
3.21 oz (90.9g)
Operating Temperature
32°-120° F (0° to 49° C)
Humidity
5-95% Non-Condensing
AC barrel connector
DC power barrel plug, type A: 5.5mm OD,

2.1 mm ID
Input Voltage
9-16VDC or 16.5-20VAC
Aux Output
10 -16 V, 5 0 0m A
Supported Zones
8 wired zones; 1 self-monitor zone
Regulatory
ETL, FCC, Industry Canada
TECHNICAL SPECIFICATIONS
Specification and availability subject to change without notice.
Smoke and CO life safety devices are not supported.
End-of-line resistor is not supported.
•
Converts hardwired loops into as many as
8 wireless zones per module (additional
modules may be added)
•
2GIG 345MHz compatible
•
Can be powered by and use backup battery
of an existing alarm panel
•
Charging circuit for backup battery with
status LED
•
Supports encryption via an on-board switch
•
ETL listed
•
Aux output supports up to 500 mA for wired
motion sensors and glass break sensors
•
On/Off switchable encryption
FEATURES
2GIG-
TAKE100
-345
Wireless Hardwire Takeover Module
Nice

©2025 Nice North America LLC. 2GIG is a registered trademark of Nice North America. All rights reserved.
All other brand names are the property of their respective owners.
1507938961
2GIG.COM
2GIG 345S
sensors offer reliable security coverage
for residential and commercial properties to keep
clients feeling secure. With sleek, modern designs that
seamlessly integrate into any environment, 345S sensors
include contact, PIR, glass break, smoke detectors,
keyfobs, and more.
2GIG 345S
sensors are compatible with the complete
2GIG security ecosystem including the
GC Touc h
™


and
2GIG EDGE
™
security panels.