Honeywell 6280 Software Upgrade Document - Dated 08/2018



Related Products

Honeywell 6280 - Talking Color Graphic Touchscreen Alarm Keypad
Honeywell 6280
Talking Color Graphic Touchscreen Alarm Keypad
List Price: $486.00
Our Price: $317.99

Related Categories


Document Transcript


6280

Touchscreen
Keypad

Software
Upgrade
s on MyWebTech


(NOT FOR TUXEDO!)

Software Revision


4
.
1
.
67




Current Upgrade Posted:


8
/
1/2018

Rev. 4.1.65 and higher no longer support

X
-
10 control, the

Light


icon has been
removed.

Link to
MyWebTech Download Center to Download Software



Improved

touchscreen respons
e time and performance when the keypad has been active for a

long period of time

This procedure assumes you have a blank SD card inserted in your computer and that you have the
ability to unzip or extract the downloaded files.


THIS UPDATE IS FOR THE 6280S AND 6280W ONLY, YOU WILL SEE AN ERROR MESSAGE IF YOU ARE
TRYING TO UPDATE THE TUXS, TUXW, TUXWIFIS OR TUXWIFIW WITH THESE FILES. DO NOT INSTALL IN
TUXEDO or TUXEDO TOUCH WI
-
FI KEYPADS.


Instructions: How to Save Software on S
D Card and Update Software on 6280 Keypad
Controller

1.

Insert a blank SD card into your device drive so you can download the software onto the SD card

2.

Click on the DOWNLOAD button and click on Save

3.

Once
saved, double click 6280_V4.1.
67
.exe. Extract files to
your desktop, or to a directory of your
choice. Once the files are extracted, copy them to the SD card, or extract all files from
6280_V4.1.
67
.exe directly to the SD card. ALL THE BELOW FILES MUST APPEAR ON THE ROOT OF
THE SD CARD FOR THE UPDATE TO BE SUCC
ESSFUL.




4.

Take the SD card with the software downloaded and insert it into the slot on
upper right side of the 6280 Keypad. You will hear a snap when t
he SD card is
inserted correctly. (For help locating the SD card slot refer to the image below).

5.

Now take a paper clip and push in the reset button located on the lower right side
of the keypad. (The Reset button is directly behind the “Message LED on the
right
side of the plastic. For help locating the Reset button refer to the image below).

6.

Once pressed the 6280 Keypad will update the new software. You will see the
system/display reboot which will take about 1 minute.

7.

A message on the screen will appear s
tating, “REMOVE THE SD CARD AND PRESS
OK TO RESET KEYPAD”. Press ok and your keypad will reboot. As soon as the
display comes up the software update will be complete.








Honeywell
HOME/resideo
Technical Support • (800)645
-
7492 • Operating Hours: 8:30am to 8:00pm EST

Have a Question?


Send an email to Our Technical Support Department! Click on the
link

Support3@
resideo.com


Uploaded