Alarm.com Onboard Video Recording with Smart View



Related Products

Alarm.com ADC-V723
Outdoor 1080p Camera w/ IR Night Vision & High Dynamic Range (HDR)
List Price: $298.00
Our Price: $193.99
Alarm.com ADC-V523
Indoor 1080p Camera w/ IR Night Vision & High Dynamic Range (HDR)
List Price:
Our Price: $158.99
Alarm.com ADC-V515
Indoor 1080p Camera w/ IR Night Vision & High Dynamic Range (HDR)
List Price:
Our Price: $111.99

Related Categories


Document Transcript

Onboard Recording with Smart View for video devices
Feature requirements
A service package with Onboard Recording support

Commercial Video 8
with
Smart View for Onboard
Recording

Commercial Video 16
with
Smart View for Onboard
Recording

Premium Video

Pro Video with Analytics 3000
with
Smart View for
Onboard Recording
*
*Note
: This configuration only supports Onboard
Recording for two cameras. All other service package
options listed support Onboard recording for all cameras
on the account.
A compatible camera

1080p Indoor Wi-Fi
Camera (ADC-V515) on
firmware version 0.0.5.096+

1080p Indoor Wi-Fi
Camera (ADC-V523) on
firmware version 0.6.1.151+

1080p Outdoor Wi-Fi Camera (ADC-V723) on
firmware version 0.6.1.151+
Note
: The firmware for the camera is updated
automatically when an Onboard recording schedule is
created for it.
A high-quality SD card designed for surveillance
256GB maximum. Supported SD card brands are as
follows:

Micron Industrial Memory cards (128GB and 256GB
cards are available to order from the Partner Portal)

SanDisk High Endurance

WD Purple
micro SD cards
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/General_Video_Information/Onboar...
Updated: Tue, 02 Feb 2021 21:34:29 GMT
1 Important
:
An Onboard Recording Schedule must be created for the camera in order for it to start recording.
Onboard Recording features
Multiple viewing options
View recorded video on the
local network (i.e., the same
network as the camera)
or remotely using a computer,
smartphone, or tablet.
Activity timeline
System events, such as Video Analytic-triggered clips,
are noted in the playback timeline on the Customer
Website.
Rolling recordings
The oldest video content on the card is
automatically
deleted
to make room for new recordings.
Data encryption
Recorded video is encrypted and can only be
viewed
when the SD card is in the camera that recorded
the video.
When a brand new Onboard Recording rule is created
for a camera, the camera
formats the micro SD card.
This deletes
all data stored on the card including
any
video recordings from a camera that may have been
previously used with the card.
Localized recordings
Each micro SD card records the video footage from the
camera it is inserted into.
The card can be removed from a camera and placed
back in that same camera at a later date. The original
data will be retained
until the card is full and the oldest
data is deleted to make room for the new recordings
provided the card does not have data from other devices
after being removed from the camera.
Configure Onboard
Recording
Install the SD card in the camera
To install an SD card in an ADC-V515:
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/General_Video_Information/Onboar...
Updated: Tue, 02 Feb 2021 21:34:29 GMT
2 1.
Verify
the device is upgraded to the latest firmware available.
2.
Locate the SD card slot on the bottom side of the camera near the QR code and MAC address.
3.
Orient the micro SD card with the metal pins facing towards the front of the camera.
4.
Insert the SD card into the slot until it clicks.
To install an SD card in an ADC-V523:
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/General_Video_Information/Onboar...
Updated: Tue, 02 Feb 2021 21:34:29 GMT
3 1.
Verify
the device is upgraded to the latest firmware available.
2.
Pull open the rubber tab on the bottom side of the camera near the QR code and MAC address.
3.
Insert the micro SD card into the slot until it clicks.
4.
Replace the rubber cover.
To install an SD card in an ADC-V723:
1.
It is recommended to insert the micro SD card before the camera is mounted to minimize the chance of dropping
the card. If the camera is mounted, remove the camera in order to more easily access the SD card slot.
2.
Unscrew the 2 screws on either side of the door found on the bottom face of the camera near the QR code and
MAC address.
3.
Carefully lift then rotate the door open to provide clearance for inserting the card into the slot for the SD card. Take
care not to tug the door which could separate it from the camera.
4.
Insert the micro SD card until it clicks.
5.
Replace the door and screw the 2 screws back firmly into place.
Create the recording rule
1.
Verify that the micro SD card is inserted into the camera.
2.
Log into the Customer Website.
3.
Click
Video
.
4.
Click
Recording Rules
.
5.
Click
Local
Recordings
.
6.
Click
+
Add New Schedule
.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/General_Video_Information/Onboar...
Updated: Tue, 02 Feb 2021 21:34:29 GMT
4 7.
Using the
Select a camera to record from
dropdown menu, select the desired device.
8.
Using the
Select recording quality
slider, select the desired quality.
9.
In
Schedule recording time
, click to select either
At all times
or
Only during the following times
.

If
Only during the follow times
is selected:
a.
Click to select the desired days to record.
b.
Using the
Starting at
and
Ending at
dropdown menus, select the period to record in hours.
10.
To limit the number of days that recordings are kept:
a.
Click the
Limit the number of days to record
toggle switch to enable a limit.
b.
Using the dropdown menu, select the desired number of days to limit the recordings to.
11.
Click
Save
.
View SD card recorded video
For a detailed list of all available Smart View features, see
View onboard recordings from a camera using Smart View
.
To view Smart View using the Customer Website
:
1.
Log into the Customer Website.
2.
Click
Video
.
3.
Click
Onboard Timeline
.
4.
Using
the video device dropdown menu, select the desired device to play back.
5.
Click
to stream the device's recorded video.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/General_Video_Information/Onboar...
Updated: Tue, 02 Feb 2021 21:34:29 GMT
5 To view Smart View using the Customer
app
:
1.
Log into the Customer app.
2.
Tap
.
3.
Tap
Video
.
4.
Tap
24/7
.
5.
Tap
.
Frequently asked questions
Can a single SD card record video from multiple devices?
No. The SD card can only record video from the device inside of which it is currently installed.
Are there local network requirements for recording to an SD card like there are for the SVR?
No. The
SD card can record video as long as the video device is enrolled and operational.
Can video continue to record to an SD card
through network disruptions?
Yes. As long as the video device has power, it can record to an SD card through a network disruption.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/General_Video_Information/Onboar...
Updated: Tue, 02 Feb 2021 21:34:29 GMT
6


Uploaded