PowerG Carbon Monoxide Detectors Product Manuals

DSC PG9933 Carbon Monoxide Detector - Install Guide
The DSC PG9933 Carbon Monoxide Detector Install Guide teaches users how to install the DSC PG9933 Carbon Monoxide Detector. The guide covers battery installation, enrollment, choosing a location, mounting, device testing, tamper protection, maintenance, and more. Learn how to install the DSC PG9933.
Added:

Qolsys TSB190620 - 80.17 PowerG Delayed Transmissions
Qolsys TSB190620 discusses an issue that affects v80.17 PowerG Radio Modem Firmware on the IQ Panel 2 Plus. Systems with v80.17 PowerG Firmware were experiencing delayed transmission on PowerG Sensors enrolled on Zones 1, 2, and 3. Update v80.25 resolved this issue. Learn all about Qolsys TSB190620.
Added:

Qolsys TSB190621-80.25-PowerG Modem Firmware
The Qolsys TSB190621-80.25-PowerG Update fixes incompatibility issues with the PG9933 (V1.0.3) and the PG9914 (V3.0.5 and V3.0.7). It also resolves an issue with delayed transmission from PowerG Sensors enrolled on zones 1, 2 and 3 for the IQ Panel 2 Plus System. Learn about Qolsys Update TSB190621.
Added:

DSC PowerG - Technical Data Sheet
The DSC PowerG Technical Data Sheet provides information and specifications regarding PowerG Sensors. This document explains PowerG Technology, the process for enrolling PowerG Sensors with an IQ Panel 2 Plus, Testing PowerG Sensors and which PowerG Sensors are supported. Learn about PowerG devices.
Added:

Incompatibility between PowerG PG9933 CO Detector and Some Qolsys IQ Panel 2 Plus Panels - Technical Advisory
This technical advisory explains how there is incompatibility between the DSC PowerG PG9933 CO Detector and certain Qolsys IQ Panel 2 Plus Systems. This PG9933 Carbon Monoxide Detector cannot be used with Qolsys IQ Panel 2 Plus PowerG Firmware Version 80.17. Learn about this sensor incompatibility.
Added: