Honeywell 5853 Data Sheet

5853
WIRELESS GLASSBREAK DETECTOR

Honeywell's 5853 Wireless Glassbreak Detector offers uncompromised performance and unmatched false alarm immunity. The FlexCore™ signal processor utilizes an Application Specific Integrated Circuit (ASIC)—processing sound data in parallel rather than sequentially. This permits sound frequency, duration and amplitude to be analyzed 50% faster to minimize false alarms while maintaining the highest possible level of detection.

The 5853 can be mounted on any wall or ceiling within a 25' range, with no minimum range limitation. The LEDs indicate test mode, alarms and trouble conditions. It is compatible with all 5800 Series wireless devices.

FEATURES
• Test mode can be activated remotely with FG-701 Tester • Four selectable sensitivity settings (Max, Medium, Low and Lowest) • FlexCore signal processor • Senses the sound of a variety of glass (tempered, wired, laminate,ordinary plate, etc.) • Sleek design with front and back case tamper • Ten year battery life with easily replaceable batteries • Transmits supervisory, low battery and tamper messages to control panel

SPECIFICATIONS
Dimensions: • 4.95" H x 3.09" W x 1.1" D Range: • 25' (7.6 meters) maximum from farthest protected glass • No minimum range Power: • Two 3V Batteries (included) - Replace only with ADEMCO # 466, Panasonic® CR123A, Sanyo® CR123A, Duracell® DL123A, or Varta CR123A (Lithium Manganese Dioxide) Operating Temperature: • 14° F – 122° F ( -10° C to 50° C)

ORDERING
5853 Wireless Glassbreak Dectector

Honeywell Security & Custom Electronics Honeywell International Inc. PO Box 9035 Syosset, NY 11791 www.honeywell.com

RE06045 L/5853/D August 2006 © 2006 Honeywell International Inc.