Honeywell IS215T Data Sheet

Related Products

Long-range Motion Detecting Wired PIR Sensor

Related Categories

Document Transcript


The IS215T Motion Sensor offers quality detection in an attractive white housing. The IS215T is fully featured, flexible and simple to install for basic security applications.

• Ultra Low current design 50% reduction in max current consumption • Silent Relay Can be used in quiet environments • Tamper Proof Design Alarm relay cannot be compromised with a magnet • Installer Friendly Settings Dip switch design offers easy to set parameters with no jumpers to mess with • Improved EMI Immunity Surface Mount Design reduces false activations due to RF interference • Selectable Sensitivity • Attractive Sleek Design The stylish white housing is designed to blend with any room décor • Tamper Switch • Surfaced Run Wiring A large wiring channel allows for quick, neat installations The sealed tamper switch signals before any enclosure access is possible Sensitivity can be adjusted to match installation requirements • Sabotage-resistant Lens Design The lens wraps around a retainer, making it more stable and difficult to sabotage • Look-down Zones Honeywell patented look-down mirror provides for optimum detection pattern directly beneath the sensor • Mounting Flexibility The unit easily mounts on walls or in corners for a full of range coverage. With subtle corner mounting knockouts, the IS215T maintains its streamlined aesthetics no matter where it is placed • White Light Immunity A white light absorbing, black bug guard dramatically increases white light immunity to greater than 6500 Lux, reducing the chance of false activation • Bug Guard Prevents insect access into the sensor optics, reducing the chance of false activation • Applications Designed for residential and light commercial applications


• Detection Method: - Dual element passive infrared • Coverage: - 40' X 40' (12m x12m) • Detection Zones: - 44 long range, 14 intermediate, 8 lower, 4 look-down (2 fields of view per PIR finger) • PIR Sensitivity: - Dip switch selectable Low (3-5 Steps PC2 and High (2-4) steps PC1) • LED Enable: - Can be enabled/disabled by a dip switch • Mounting Height: - 7 ft. 6 inches (2.3 meters) • Power Requirements: - 10-14VDC - 7mA @ 12VDC • Alarm Relay: - Form A (NC)\90mA @ 16VDC • Tamper Switch: - 30V, 0.5A. • Operating Temperature: - 14º – 131ºF (-10º to +55ºC) • Relative Humidity: - 5% to 95% non-condensing • RF Immunity: - 30V/m from 10-1000 MHz • White Light Immunity: - >6500 Lux • Dimensions: - 3 3/8" H X 2 3/8" W x 1 1/2" D (max protrusion) (86mm x 60mm x 38mm) • Weight: - 66.62g (2.35oz) packaged product 92.14g (3.25oz) • Agency Listing: - FCC - IC - EN50131-1 Security Grade II, Environmental Class II - Ctick - cULus - CE - ANPI - VSO - SKAFOR - NCP - FG - SBSC - MABISZ - Techom
TOP VIEW Wide Angle Lens

SIDE VIEW Wide Angle Lens

IS215T Passive Infrared Motion Sensor

0-000-110-01 0-000-155-01 0-000-111-01 SMB-10: Universal White Swivel Mount Bracket SMB-10T: Tampered Universal White Swivel Mount Bracket SMB-10C: Universal White Ceiling Mount Bracket

Honeywell Security & Custom Electronics Honeywell 2 Corporate Center Drive Suite 100 P.O. Box 9040 Melville, NY 11747

L/IS215T/D August 2007 © 2007 Honeywell International Inc.