Interlogix TX-2810-01-4 - Data Sheet



Related Products

Interlogix TX-2810-01-4 - Internals Wireless Outdoor PIR Motion Detector
Interlogix TX-2810-01-4
Wireless Outdoor PIR Motion Detector

Related Categories


Document Transcript

Outdoor Motion
Detectors
PIR and Dual Technology
Intrusion
The DI601, TX-2810-01-4 and DDI602U-F1 outdoor motion
detectors use two independent passive infrared sensors to detect
and confirm movement. The DDI602U-F1 is enhanced with a
microwave sensor module which increases the effectiveness and
accuracy of detection. The DDI602U-F1 requires all three sensors
(two PIR plus the microwave) to trigger in order for the detector to
signal an alarm.
Designed for maximum flexibility to accommodate a variety
of applications, the DI601, TX-2810-01-4 and DDI602U-F1
detectors feature programmable options including a variable
pulse count and a choice of three detection ranges. These units
also include jumpers to configure internal end-of-line (EOL)
resistor values, when EOL resistors are required. In addition,
the integral dual-axis tilt sensor allows 180º of pan and 90º of
tilt, which increases the speed of the outdoor installation and
provides incredibly accurate aiming of the detection pattern which
is concealed behind a protective UV lens.
With a wide operating temperature range and IP 65 rating, these
sensors can be installed in a variety of challenging environments.
Masking sliders and adhesive mask can be used to alter the field
of view to match a camera or achieve pet immunity.
Overview
• Selectable electronic range setting
• Attractive aesthetics
• 10 to 70º detection angle
• 180º pan and 90º tilt for flexible install
• Sensor
module
is hidden
• Built in EOL resistors
• High dust and humidity resistance (IP65)
• 5-year warranty (hardwired), 2-year warranty (wireless)
• Back tamper switch
• Adjustable pulse count
• Masking sliders to modify field of view

Wireless variant (TX-2810-01-4) has an average


battery life of 3 years
Standard Fe ature
S
interlogix.com North America
T 855-286-8889
Asia
T 852-2907-8108
Australia
T 61-3-9239-1200
Europe
T 32-2-725-11-20
Latin America
T 561-998-6114
Outdoor Motion
Detectors
DI601
DDI602U-F1
TX-2810-01-4
Ordering Information
Part No.
Description
DI601
Outdoor PIR Detector;
10/20/30m – 33/66/98 ft. selectable
DDI602U-F1
Outdoor Dual Technology PIR Detector;
10.525 GHZ 10/20/25m - 33/66/82 ft. selectable
DI601-WT
Walk tester for DI601 and DDI602 series.
Used during installation of motion sensors;
when PIR detects motion, an LED and sounder
provide notification; range up to 150 feet.
TX-2810-01-4
Wireless 319.5 MHz Gen 2 Outdoor PIR
Detector; 10/20/30m - 33/66/98 ft. selectable
Specifications
Description
DI601
TX-2810-01-4
DDI602U-F1
Detection area
Programmable:
10 m / 30 ft., 20 m / 66 ft., or 30 m / 98 ft.
Programmable:
10 m / 30 ft., 20 m / 66 ft., or 25 m / 82 ft.
Coverage
10 to 70° detection angle,

30 x 24 m / 98 x 79 ft. coverage max.
10 to 70° detection angle,

25 x 24 m / 82 x 79 ft. coverage max.
Adjustment
180° pan, 90° tilt
Fresnel lens
28 zones for each detection element, which can be masked with the curtain sliders
Customized optics
Double-silicon shielded quad element eliminates 50,000 lux of white light
Outputs
Silent, solid state, magnetically immune
Silent, solid state, magnetically immune
Microwave and PIR
N/O
Volt-free relay, signal contact 24VAC/DC at 50mA with an integral 25 O series resistor. Alarm time 5 seconds.
N/C
Volt-free relay, signal contact 24VAC/DC at 50mA with an integral 25 O series resistor. Alarm time 5 seconds.
Power input
9 to 15VDC
3VDC (2 x CR123) for 3 years;
extendable to 5 years with 2 x CR123
9 to 15VDC
Current
7mA (12V nominal)
N/A
11mA (12V nominal)
Pulse count
1 or 2
Temperature compensation
Analogue (thermistor) and digital sensitivity adjustment
Control
Digital microprocessor with nonvolatile memory
Operating/storage
temperature
-30 to +65°C / -22 to 149°F
-25 to +65°C / -13 to 149°F
-30 to +65°C / -22 to 149°F
Housing
High-impact ABS plastic with HDPE cover, UV stabilized
Dimensions (W x H x D)
5.79 x 7.36 x 5.51 in. (147 x 187 x 140 mm)
Weight
306 g net, 532 g gross / 10.79 oz net,
18.77 oz gross
334 g net, 555 g gross / 11.77 oz net,
19.58 oz gross
323 g net, 549 g gross / 11.39 oz net,
19.37 oz gross
Microwave module
N/A
N/A
10.525 GHz
Built in EOL resistors’ values
1, 2.2, 3.3, 4.7, 5.6, and 6.8 k ohm.
N/A
1, 2.2, 3.3, 4.7, 5.6 and 6.8 k ohm.
Mounting height
Variable up to 6m / 20 ft. – Optimum height 3m / 10 ft. for full range
Beam Diagram
DI601/TX-2810-01-4
DDI602U-F1
12m / 39 ft.
12m / 39 ft.
10m / 33 ft.
10m / 33 ft.
8m / 26 ft.
8m / 26 ft.
6m / 20 ft.
6m / 20 ft.
4m / 1
3 ft.
4m / 1
3 ft.
2m / 7 ft.
2m / 7 ft.
0
0
0
2
7
4
13
6
20
8
26
10
33
12
39
14
46
16
52
18
59
20
56
22
79
24
79
26
85
28
92
30m
98
ft.
12m / 39 ft.
12m / 39 ft.
10m / 33 ft.
10m / 33 ft.
8m / 26 ft.
8m / 26 ft.
6m / 20 ft.
6m / 20 ft.
4m / 1
3 ft.
4m / 1
3 ft.
2m / 7 ft.
2m / 7 ft.
0
0
0
2
7
3
10
5
16
7
23
8
25
10
33
12
39
13
42
15
49
17
56
18
59
20
66
22
72
23
75
25m
82ft.
(7 0º)
70º
PIR pattern (DI601/TX-2810-01-4)
PIR pattern with microwave
coverage (DDI602U-F1)
interlogix.com
Specifications subject to change without notice.
© 2013 Interlogix.
All rights reserved.

Interlogix is part of UTC Climate, Controls & Security,

a unit of United Technologies Corporation.
306-3694 2013/06 (74941)


Uploaded