Qolsys QR0119-840 - Battery Quick Install Guide - Dated 10/12/22

IQ HUB BATTERY QUICK INSTALL GUIDE
IQ HUB BATTERY QUICK INSTALL GUIDE
BATTERY REPLACEMENT
Document#: IQPHB-QG-10-22
Revision#: 10/12/22
Issue Date: OCT 2022
Qolsys Product #: QR0119-840
TechSupport@Qolsys.com
CONTACT TECH SUPPORT
GOT QUESTIONS?
BATTERY REPLACEMENT
1.
Power down panel:
Go to Advanced Settings
and enter the Installer/Dealer/Master code,
then select “Power Down”
2.
Remove Battery Door:
Remove the panel
from the backplate or table stand and then
use a small screwdriver to remove the plastic
door covering the battery.
3.
Remove Battery:
Pull the fabric tab that is
located under the battery to remove it from
the panel.
4.
Install New Battery:
Install the new battery
paying careful attention to polarity and being
sure to place the fabric pull tab under the
battery to make future removal easier.
Re-install Battery Door and screw, then re-
mount to backplate or table stand.
2
CAUTION: Do
NOT
use a screwdriver or anything sharp that could puncture the battery.
Battery
3
WARNING:
Caution – The battery used in this device may present a risk of fire or chemical burn if mistreated.
 
Do not
disassemble, heat above 60°C, or incinerate.
 
Replace battery with GUANGZHOU GREAT POWER
ENERGY&TECHNOLOGY CO LTD, Ltd., Model ICR 18650 only. Use of another battery may present a risk of fire or
explosion.
WARNING:
Dispose of used battery promptly.
 
Keep away from children.
 
Do not disassemble and do not dispose of in fire.
Dispose of used battery promptly.
 
Keep away from children.
 
Do not disassemble and do not dispose of in fire
.