Honeywell IS25100TC

Long Range PIR Motion Detector

Average rating:

(based upon one review)

The Honeywell IS25100TC is a long range motion detector which utilizes passive infrared technology. Housed in a similar white case as Hon...

This product has been discontinued and is no longer in stock.

Description

The Honeywell IS25100TC is a long range motion detector which utilizes passive infrared technology. Housed in a similar white case as Honeywell’s IS2500 motion detectors, the IS25100TC provides the best in interior protection at a maximum range. With a coverage range of 20’ x 100’ out from the sensor, the IS25100TC is ideal for long hallways, warehouses, or buildings in which a long range motion detector is needed.

The IS25100TC is equipped with four sensitivity levels to meet the needs of your environment. The settings are easily changed with selectable DIP switches that are located on the circuit board of the motion detector. With a range of 100’, make sure to note all possible factors that would contribute to motion in the field of view of the IS25100TC. Items that could move when heating or cooling systems come on, machinery, and direct outside light should all be avoided when selecting the best mounting position for the long range PIR. A red LED, which can also be turned off via a DIP switch, turns on for three seconds when the motion detector is activated. This allows you to walk test the IS25100TC to ensure proper installation, and also to notify you of an alarm or that the sensor has tripped. The LED will flash for approximately three minutes after power up, or in a trouble condition.

The IS25100TC long range motion is the ideal choice for all hardwired security systems and for a Honeywell VISTA control panel in all situations that require maximum detection distance. The IS25100TC will allow you to cut down on the number of motion detectors needed to protect very long range areas. You no longer need to let an interior space go unprotected because traditional motions do not have the needed coverage with the IS25100TC long range motion detector.

Brand: Honeywell

Reviews
Great Long-Range Motion!
Submitted on 05/08/2020 Alarm Grid

The Honeywell IS25100TC is a long-range motion detection sensor. It uses passive infrared (PIR) technology to detect movement. It is a hardwired sensor that must be connected with the panel, a wired expansion module, or a wired to wireless converter. What makes this motion sensor unique is that it detects movement across a very long and narrow area. Its coverage area is measured as 100 feet by 20 feet. This makes it ideal for long hallways, corridors, and other long and narrow areas. Overall, we think this is a very good product, and we give a 5 Star rating.

There are many things to like about the Honeywell IS25100TC. For one, it detects movement across a very long and narrow area, making it suitable for areas with similar dimensions. The sensor has an LED light that is useful for walk testing and performing any necessary troubleshooting. The sensor has settings that are easily configured by adjusting its DIP switches. As a Honeywell product, it is of high quality, and it should last for a very, very long time.

But there are some downsides to the Honeywell IS25100TC that should also be considered. As a motion sensor, it must draw some power from the panel, though this amount is very small. But we have seen a sensor push some users over the appropriate load limits for their panels. While the IS25100TC is generally used as a commercial sensor, it cannot be used with a polling loop panel. This means that it can only be used with wire runs that are somewhat limited in length. In most situations, this won't be a big issue, but it may come into play if you are trying to use the sensor with a long wire run from the panel. The sensor also lacks anti-masking, which would have been a nice addition.

The Honeywell IS25100TC is recommended by Alarm Grid for anyone needing a wired long-range motion sensor for a non-polling loop panel. It gets 5 Stars.

Good: Long & Narrow Coverage Area, LED Light, DIP Switch Settings, Great Build Quality

Bad: Draws Some Power From Panel, Not for Polling Loop Panels, Lacks Anti-Masking

Bottom Line: 5 Stars

This could be setup with a relay to turn on a flood light. Not sure it can be done without a relay.
Can this be wired to turn on a floodlight?
Hi Abel. There is no separate mounting plate. You would separate the front and back of the unit. Attach the back of the unit to the wall from the inside, and then reattach the front of the unit. If you have any further questions, please reach out at support@alarmgrid.com.
I'm sure I know the answer to this question, but does this product have a mounting plate?? If so, could I purchase it separately? PLease advise.
* Based on a 10% APR with 12 months financing. APR's will vary between 10% - 30% based on credit score and various factors.