Alarm.com ADC-SEM210-VT - Data Sheet

System Enhancement Module
HONEYWELL/ADEMCO VISTA
The Alarm.com Dual Path System Enhancement Module (SEM) is the
most cost effective and comprehensive solution to migrate compatible
Honeywell/ADEMCO VISTA-10P, VISTA-15P, and VISTA-20P panels to
Alarm.com’s award-winning interactive services. The Dual Path SEM
supports the 4G LTE cellular network and optional Broadband Ethernet.
This ensures the longest life cycle with the most secure and reliable service.
•

Enable wireless reporting of alarms and other system events using
the LTE wireless (cellular) network and Broadband Ethernet
•

Configure and support installations from any browser or smartphone
using Alarm.com’s familiar and easy-to-use web and mobile support tools,
including the Partner Portal and MobileTech
•

Enable Alarm.com interactive monitoring and alerting for end users
•

Integrate Alarm.com’s home automation and energy management
services with the SEM’s built-in Z-Wave Plus capabilities
FE ATU RES
•
Fast, reliable & secure wireless signaling
•
Broadband as an optional secondary communication path
•
Remote monitoring & control via web/mobile
•
Remote panel configurations with Uploader/Downloader,
including Add Sensors
•
Remote access and management of locally saved user codes
•
Home automation & energy management
•
Support for Z-Wave Plus devices
•
Video monitoring
•
No separate power supply needed
•
Over the air (OTA) upgrades
•
CID and SIA central station signaling

SPECIFICATIONS
COMPATIBILITY
Honeywell/ADEMCO VISTA-10P, VISTA-15P,
and VISTA-20P and equivalent panels.
POWER REQUIREMENTS
12 V nominal, 130 mA (continuous)
2000 mA (instantaneous peaks)
maximum (from panel battery)
CELLULAR NETWORK
4G LTE
PANEL INTERACTIONS
Three keypad bus connections 12V power
and ground to panel battery
ALARM.COM MODULE INDICATORS
One module/panel communication status LED,
one module power LED, one automation LED,
three wireless communication status LEDs
SEM CIRCUIT BOARD INDICATORS
One LAN LED, one processor LED,
one COMM fail LED
Z-WAVE FREQUENCY
908.4 MHz
OPERATING TEMPERATURE
32°F - 120°F (0°C - 49°C)
STORAGE TEMPERATURE
-30°F - 140°F (-34°C - 60°C)
HUMIDITY
90% relative humidity non-condensing
ENCLOSURE DIMENSIONS (L
x W x D)
7.5 x 4.25 x 1.5" (19.05 x 11.43 x 3.81 cm)
CASE MATERIAL
High-impact, ABS plastic
CARRIER OPTIONS
AT&T (US AND CANADA)
Part #: ADC-SEM210-VT-AT
VERIZON (US)
Part #: ADC-SEM210-VT-VZ
TELUS (CANADA)
Part #: ADC-SEM210-VT-TL
www.alarm.com
© 2019 Alarm.com. All rights reserved.
ADC-SEM210-VT