Alarm.com ADC-V622 - User Guide (How to Factory Default)
- Wireless Security Cameras
- Security Camera Systems
- Low-Light Security Cameras
- HD Cameras
- 1080P Cameras
Factory reset an ADC-V622 to its default settings
It is recommended that the device be powered on for at least two
minutes before trying to factory reset it.
: If the factory reset is attempted immediately after power up it will not work as the device will still be
rebooting. After performing a factory reset, it is strongly recommended to leave the device alone and plugged into power
buttons to scroll to the
Follow the audio prompts to initiate a Factory
The camera will reboot with factory defaults.
: If the camera was previously installed on an Alarm.com account, it will need to be deleted before it can be
Updated: Fri, 17 Aug 2018 15:59:30 GMT