Alarm.com Smart Water Valve SWV100 - Data Sheet

www.alarm.com
© 2020 Alarm.com. All rights reserved.
*
Additional parts required: Installation will require additional fittings to connect the ends of the valve to
the pipe. The type of fittings needed will depend on the existing pipe size, material, and threading type
as well as applicable plumbing codes.
ADC-SWV100
INCLUDED ACCESSORIES
*
•
ADC-SWV100 Control Unit
•
Brass valve
•
Actuator
•
Mounting plate
•
Drywall anchors &
screws (x2)
•
Cable ties (x3)
•
Power adapter
•
User guide
FE ATU RES
•
Open / close water valve
remotely
•
Automatically shut off water
when paired with a water sensor
•
Modular design
•
Z-Wave Plus communication
•
Z-Wave S2 security protocol
SPECIFICATIONS
OPERATING TEMPERATURE
14°F to 185°F (-10°C to 85°C)
COMMUNICATION
Z-Wave Plus
RESTRICTIONS
For indoor use only
Threads: Female NPT
Potability: Conforms to NSF/ANSI 61
and 372 standards for potability
CONTROL UNIT DIMENSIONS
2.75 x 4.0 x 1.25” (6.99 x 10.2 x 3.18 cm)
ACTUATOR AND VALVE DIMENSIONS
2.0 x 4.5 x 3.75” (5.08 x 11.43 x 9.53 cm)
POWER SUPPLY CABLE LENGTH
19.7’ (6 m)
PLUMBING CERTIFICATIONS:
ICC-ES-PMG (compliance with NSF 61 and
NSF 372)
Massachusetts Accepted Plumbing Products
Registry
POWER
100-240 VAC (50/60 Hz)
VALVE
Size: 1”
The Smart Water Valve provides peace of mind that your home
is protected against water damage. Set up rules to automatically
shut off your water when a water sensor detects a leak. Use the
Alarm.com app to turn your water on or off remotely.
Smart Water Valve