Honeywell IS216 Data Sheet
PASSIVE INFRARED MOTION SENSOR
The IS216 family of PIR motion sensors offer quality detection in an attractive white housing that blends with any décor. The IS216 is flexible and simple to install for basic security applications—mounting easily on walls or in corners. The IS216T contains the same great features as well as a case tamper.
• UV Tolerant Lens Can withstand high UV environments with minimal degradation • Temperature Compensation Advanced Dual Slope • Microprocessor Controlled Digital processing for improved detection and false alarm protection • Shock Algorithm Reduces false alarms • Tamper Proof Design Alarm relay cannot be compromised with a magnet • Installer Friendly Settings DIP switches are easier to program and can not be lost unlike jumpers • Improved EMI Immunity Surface mount design reduces false activation due to RF interference • Attractive Sleek Design The stylish white housing is designed to blend with any room décor • Surfaced Run Wiring A large wiring channel allows for quick, neat installations • Look-down Zones Honeywell patented look-down mirror provides for optimum detection pattern directly beneath the sensor • Mounting Flexibility The unit easily mounts on walls or in corners for a full range of coverage. With subtle corner mounting knockouts, the IS216 maintains its streamlined aesthetics no matter where it is placed • Sabotage-resistant Lens Design The lens wraps around a retainer, making it more stable and difficult to sabotage • Selectable Sensitivity Sensitivity can be adjusted to match installation requirements • Tamper Switch (IS216T only) The sealed tamper switch signals before any enclosure access is possible • White Light Immunity A white light absorbing, black bug guard dramatically increases white light immunity to greater than 6500 Lux, reducing false activations • Black Bug Guard Prevents insects from entering the sensor optics, reducing the chance of false activation • Applications Designed for residential and light commercial applications • Silent Relay Can be used in quiet environments • Automatic Walk Test Saves time on installation
PASSIVE INFRARED MOTION SENSOR
• Detection Method: - Dual element passive infrared • Coverage: - 40' X 40' (12m x12m), 90º wide angle • Detection Zones: - 44 long range, 14 intermediate, 8 lower, 4 look-down • PIR Sensitivity: - DIP switch selectable Low (3-5 Steps PC2) and High (1-3 Steps PC1) • LED Enable: - Can be enabled/disabled by Autowalk DIP switch • Mounting Height: - 7' 6" to 9' (2.3m to 2.7m) • Power Requirements: - 8.5 – 15.4VDC - 16mA @ 12VDC • Alarm Relay: - Form A (SPST)\30mA @ 24VDC MAX 40 Ohm protective resistor • Tamper Switch: - 24VDC, 30mA • Temperature Compensation: - Advanced Dual Slope • Operating Temperature: - 14º F – 131º F (-10º C to +55º C) • Relative Humidity: - 5% – 95% non condensing • RF Immunity: - 30V/m from 10-1000 MHz. • White Light Immunity: - >6500 Lux • Weight: - -66.62g (2.35 oz)
TOP VIEW Wide Angle Lens
- Packaged Product 92.14 g (3.25 oz)
• Dimensions: - 3 3/8" H X 2 3/8" W x 1 1/2" D (max protrusion) (86mm x 60mm x 38mm) • Agency Listing: - FCC - IC - EN50131-1 and TS 50131-2-2 Security Grade 2, Environmental Class II - Ctick - CE - UL639 listed - cUL listed to ULCS306-03
SIDE VIEW Wide Angle Lens
IS216 IS216T Passive Infrared Motion Sensor Passive Infrared Motion Sensor with Tamper
0-000-110-01 0-000-155-01 0-000-111-01 SMB-10: Universal White Swivel Mount Bracket (5 Pack) SMB-10T: Tampered Universal White Swivel Mount Bracket (5 Pack) SMB-10C: Universal White Ceiling Mount Bracket (5 Pack)
For more information: www.honeywell.com/security/hsc Automation and Control Solutions Honeywell Security & Communications 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 1.800.467.5875 www.honeywell.com
L/IS216D/D September 2009 © 2009 Honeywell International Inc.