Honeywell Tuxedo Touch - Primary to Secondary Role Shift

-

1

-

Updated:
9/22/16




Step
-
by
-
Step



How to Switch TuxWifi
Z-Wave Roles
from Primary to
Secondary C
ontroller
and S
econdary
to P
rimary
Controller


1.
Go to tools


















2.
Go to System






-

2

-

Updated:
9/22/16




Step
-
by
-
Step





3.
Go to Advanced Setup


















4.
Enter your installer code
(if the panel is not connected to the panel
default code
is 4140)







-

3

-

Updated:
9/22/16




Step
-
by
-
Step




5.
Go to Keypad Test


















6.
Select Z
-Wave Test







-

4

-

Updated:
9/22/16




Step
-
by
-
Step




7.
Select the command to Shift the controller



















8.
A confirmation message will show while the process takes place.

Message will go away when role switch is completed.







-

5

-

Updated:
9/22/16




Step
-
by
-
Step



When devices are added or removed from the Z
-Wave network, the device
information needs to be updated in the Secondary Keypad (Controller).


From the Primary controller, do the following:


1. Press Add on Primary controller.


2. Press Add on Secondary controller.


The controller scans for device changes. The message is displayed: “Devices
added
successfully
”