Qolsys IQ DW MINI EXTENDED-S
Encrypted Wireless Sensors for IQ Panel 2
Do not be fooled by the small footprint of the DW MINI EXTENDED-S! The double battery compartment (2 x CR2032 3V coin cell batteries) gi...
Do not be fooled by the small footprint of the DW MINI EXTENDED-S! The double battery compartment (2 x CR2032 3V coin cell batteries) gives this encrypted mini some serious long range RF capabilities: 600 feet in open air! This is the best option for IQ2 owners looking for the best encrypted long range wireless door/window sensor.
The IQ DW MINI-EXTENDED-S uses Qolsys' S-Line rolling-code encryption to ensure that transmissions between the contact and the panel remain secure. The transmitter for this device should be mounted on the frame or other unmoving portion of the opening to be protected. The magnet should be installed on the moving part. When the protected opening is closed, the included magnet should be within .6 inches or less of the transmitter. This will ensure proper operation.
In addition to the internal reed switch and magnet operation, an external, normally closed contact can be wired to the terminals inside the contact. This will act as a second point of protection, and will require the programming of a second zone for the transmitter. This is perfect when you want to protect both a window, and a screen. Use the magnet and reed switch to protect the window, use an external contact wired into the transmitter to protect the screen. The wire length between the external contact and the screw terminals on the transmitter should not exceed twenty (20) feet.
- Dimensions: 2.5"H x 1"W x .5"D
- Transmitting Range: 600ft, open air
- Operating Frequency: 319.5 MHz
- Supervisory Interval: 70 minutes
- Operating Temperature: 14F to 122F (-10C to 50C)
- Operating Humidity: 5% - 95% Non-Condensing
- Magnet Spacing: .6 inches or less
Replacement Magnet for Qolsys Door/Window Contacts
* Based on a 10% APR with 12 months financing. APR's will vary between 10% - 30% based on credit score and various factors.