Product Manuals

Resideo launched on October 30th, 2018, and this document is the new EULA that had been posted to the Total Connect 2.0 main page. Customers, including those who had previously agreed to the EULA before, had to accept this agreement in order to use the Total Connect 2.0 service. Review the TC2 EULA.

The Interlogix HDX-Series Wireless Heat Detector install Guide teaches users how to install an HDX-Series Heat Sensor. The instructions apply to the HDX-15-345, and information for mounting to the wall or ceiling and programming to the system is shown. Learn how to install an HDX-Series Heat Sensor.

The Interlogix SDX-135Z Wireless Smoke and Freeze Sensor Data Sheet provides important information regarding the SDX-135Z. This includes any device specifications and product dimensions, as well as a basic overview of how the sensor should be used. Learn about the Interlogix SDX-135Z Wireless Smoke.

The Interlogix SDX-135Z Wireless Smoke Interconnect Setup Guide shows users how to create an interconnected network of all their wireless smoke detectors. That way, if one sensor activates, the others will sound as well to properly alert people in the building. Learn how to interconnect your smokes.

The Interlogix SDX-135Z User Guide teaches users how to get started with their new smoke detector and freeze sensor. The guide includes information on choosing a mounting location, how to test the device and how to perform basic maintenance. Learn how to use your Interlogix SDX-135-Z Wireless Smoke.

The 2GIG WO15EMZ5-1 Z-WAVE In-Wall Outlet Install Guide teaches users how to get started with this plug-in module. The guide includes the installation and programming steps, and it displays device features and programming information. Get the most out of your 2GIG WO15EMZ5-1 with this helpful guide.

2GIG GC3 Installation and Programming Guide dated 2018. This revised Installation and Programming guide includes information about using Smart Areas (partitioning) on the 2GIG GC3. In order to support this feature, the GC3 must be running Firmware version 3.2.0.6581 or later. Learn how to use a GC3.

The 2GIG GC3 Firmware Version 3.2.0.6581 Release Notes cover all of the important information regarding the latest firmware update for the 2GIG GC3 Alarm System. This update includes support for partitioning through "Smart Areas" plus other features. Learn about 2GIG GC3 Firmware Version 3.2.0.6581.

The CMS Compass and Myalarms.com Portal Quick Start Guides help end users get started with CMS Compass and the Myalarms.com service. This guide is applicable to both the desktop and mobile versions. This service can be used with Android and iOS devices. Learn how to use CMS Compass and Myalarms.com.

The WST-600 Install Guide shows users how to get started with their DSC WST-600 Life-Safety Sensor Takeover Module. This is a listening device that lets a user integrate an existing life-safety sensor with a DSC 433 MHz Security System. Find out how to get started using your WST-600 takeover module.