Qolsys TSB# 210927 - Notice Regarding Linear GD00Z-6, 7, & 8 Z-Wave GDO Incompatibility
Related Products
Related Categories
- Touchscreen Alarm Panels
- Wireless Touchscreen Alarm Panels
- Touchscreen Alarm Panels
- Home Automation Controllers
- Garage Door Controllers
Document Transcript
TSB #:
210927
DATE:
09/27/21
RE:
NOTICE REGARDING LINEAR GD00Z-6, 7 & 8 Z-WAVE GARAGE DOOR OPENER INCOMPATIBILITY -
REVISED
Overview:
An issue was recently discovered in IQ Panel 2 software version 2.6.1, IQ Hub software version 3.0.0 and IQ Panel
4 software 4.0.0 where under limited conditions remote commands sent to S2 versions of Linear Z-Wave
Garage Door Openers (GD00Z-6, GD00Z-7 & GD00Z-8) from the ADC Customer App/Website may not
execute as expected, resulting in repeated commands causing the Garage Door to open/close inadvertently.
Only panels running 2.6.1, 3.0.0 or 4.0.0 software with Z-Wave firmware 6.81.03 or higher AND using the S2
version of the Linear Garage Door Opener are affected.
Resolution:
This incompatibility will be fixed in the next panel software update versions 2.6.2, 3.0.1 and 4.0.1.
TECHNICAL SERVICE BULLETIN
NOTICE REGARDING LINEAR GD00Z-6, 7 & 8 Z-WAVE GDO INCOMPATIBILITY - REVISED
- Uploaded