The Honeywell 5834-4EN is a four button wireless security key fob which is compatible with Honeywell’s 5800 series wireless products. The (4) programmable buttons can be used to perform any system zone response, and are typically used to arm the system in stay mode, arm the system in away mode, disarm the system and activate a panic alarm. The 5834-4EN allows the user to control their Honeywell wireless security system while away from the keypad, but still in range of the system’s wireless receiver. The 5834-4EN is functionally identical to the Honeywell 5834-4, with the addition of a stylized metallic plated design and key ring.
The Honeywell 5834-4EN security key fob has (8) total programmable features. In addition to the feature that each button is programmed to activate, two buttons can be held at a time to activate the secondary programmable features. In order to prevent false alarms, the 5834-4EN has recessed buttons which must be held for 1/2 second prior to a signal being transmitted. This prevents accidental activations when the security key fob is placed in a pocket or purse. The bi-color LED flashes when transmitting a signal so the user is aware when each button is activated. If the LED does not flash after a button is held, the 5834-4EN has a low battery.
All Honeywell security key fobs should be programmed with an unsupervised “BR” (Button Type RF) input type, with each button representing an individual zone in order to avoid trouble signals at the panel when the 5834-4EN is taken out of range of the wireless receiver. The 5834-4EN has two serial numbers for programming, serial number 1, loops 1-4 are used for each button, A, B, C&D; and serial number 2, loops 1-4 are used for each pair of buttons, A&B, C&D, A&C, B&D. The second serial number is (1) digit higher than the serial number printed on the back of the 5834-4EN. The 5834-4EN has a range of approximately 50’ nominal.
The factory installed replaceable 3V lithium battery will power the 5834-4EN for 3-5 years.