Honeywell VISTA 20IP Data Sheet
The high capacity, feature-rich VISTA-20P lets you deliver more value to your customers on each and every sale with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet Internet or digital communicator can be installed in premises without TELCO lines with no sacrifice in functionality. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.
• IP alarm reporting and uploading/downloading capability for Internet and Intranet use via iGSMV, 7845i-ENT or GSMV • Supports four graphic touchscreen keypads • Wireless keys can be programmed without using zones • Eight on-board hardwired zones standard (15 when Zone Doubling feature is used) – 40 hardwire expansion zones – 40 wireless expansion zones • Two low current on-board trigger outputs • 100 Event Log viewable at system keypads with time/date stamp • 48 system user codes assignable to either partition • Expandable to 48 total zones when used with hardwired and/or wireless expansion modules • Two independent partitions plus a common partition – Global Arming from any system keypad – Go to function to view or operate one partition from the other – Separate partition account numbers • 16 output devices – Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or X-10® devices (when used with a 4300 Transformer) • Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes • Supports four-wire and up to 16 two-wire smokes – Works with Sentrol CleanMe™ maintenance signal • Multiple actions on output devices depending on system state – Turns lights off when system arms – Turns the same light on when system disarms – Flashes same lights when system is in alarm • Built-in phone line cut monitor with programmable delay and annunciation options – Display on system keypads – Trigger local sounders – Trigger system bell Security Dealer Features • Automatic System Load Shed – During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries. • Dynamic Signaling – Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio Valuable End-User Features • Viewable on system keypads: – Exit countdown – Time and date display* – Event log* • Auto keypad backlighting on entry • Keyswitch arming • Programmable macro buttons and single-button arming • Supports a variety of wireless remote controls for single-button operation • User Scheduling – Automatically activates X-10 and relays at programmed times – Latchkey reports to pagers – Auto arm/disarm – “User access” time windows • Supports up to four end-user numeric pagers • VIP Module allows system control from any touchtone phone • Chime by zoneo
*Requires custom alpha keypad
Electrical • Aux. power 12VDC, 600mA maximum • Seven hour standby at 400mA aux. load with four amp hour battery • 16.5VAC/25VA transformer • Alarm output 12VDC, 2.0 amps max. - For UL installations, combined aux. and alarm output cannot exceed 700mA Output Control • Supports up to four relay boards (up to 16 relays) • Optional X-10 transformer/interface (part no. 4300) may be used to control up to 16 X-10 receiving devices Zones • Eight hardwired zones (15 with zone doubling) • Selectable response 10msec, 350msec, 750msec • Assignable to any partition • 20 selectable zone types plus four configurable zone types • Programmable swinger suppression Expansion Devices • 4219 – Eight hardwired zones – 16mA • 4204 – Up to four relays – 15mA standby (each active relay draws an additional 40mA) • 4229 – Eight hardwired zones and two relays – 36mA (each active relay draws an additional 40mA) Accessories • iGSMV Internet and Digital Cellular Communicator with Remote Service Capability • 7845i-ENT Enterprise Internet Communicator • GSMV Digital Cellular Communicator with Remote Service Capability • 4286 VIP Voice Module – 220mA • 5881ENL RF Receiver supports up to eight zones – 60mA • 5881ENM supports up to 16 zones – 50mA • 5881ENH supports up to 48 zones – 50mA • 5883 Transceiver supports up to 40 zones – 80mA Keypads • 6160 Custom Alpha (required for programming) – 100mA • 6160V Custom Alpha Voice – 100mA • 6150 Fixed English LCD – 85mA/40mA • 6150V Fixed English Voice LCD – 85mA/40mA • 6150RF Fixed English RF LCD – 85mA/40mA • 6148 Fixed English LCD – 70mA/30mA • 6270 Graphic Touchscreen • 6272CBV Graphic Touchscreen with Voice (Black) • 6272CSV Color Graphic Touchscreen with Voice (Silver) • 6272CV Color Graphic Touchscreen with Voice (White) • 8132 Advanced User Interface Agency Listings • ETL Residential Fire, Burglary and Commercial Burglary Smoke Detectors • Supports up to 16 two-wire smoke detectors • Supports four-wire smoke detectors Communications • iGSMV Internet and Digital Cellular Communicator with Remote Service Capability • 7845i-ENT Enterprise Internet Communicator • GSMV Digital Cellular Communicator with Remote Service Capability • Touchtone or pulse • Formats supported – ADEMCO Contact ID – ADEMCO 4 + 2 Express – ADEMCO low speed – Sescoa/Radionics • 3 + 1, 4 + 1 and 4 + 2 reporting • Reporting capabilities – Split – Dual – Split/Dual – True dial tone detection • Low battery reports 11.2 – 11.6VDC • AC loss and restoral reporting supported
VISTA-20P VISTA-20PSIA Control Panel Control Panel for CP-01 SIA Certifications
For more information: www.honeywell.com/security/hsc Automation and Control Solutions Honeywell Security & Communications 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 1.800.467.5875 www.honeywell.com
L/VISTA20PD/D June 2011 © 2011 Honeywell International Inc.