Leviton VP0SR-10Z

Z-Wave Coordinating 3-Way Switch

Average rating:

(based upon 0 reviews)

The Leviton VP0SR-10Z is a coordinating remote to be used in 3-Way and other multi-pole configurations with Leviton Z-Wave switches.
  • Z-Wave

This product is not sold by Alarm Grid at this time. As an alternative, we recommend:

Description

The Leviton VP0SR-10Z is a coordinating remote to be used in 3-Way and other multi-pole configurations with Leviton Z-Wave switches such as the Leviton VRS15-1L and Leviton VRS05-1LZ.

Pairing a Leviton VP0SR-10Z with the proper Z-Wave switch assumes that the electrical circuit you are plugging into is properly wired using a traveler wire.

If not, we recommend pairing your Z-Wave switch with a 1-button controller switch the Leviton VRCS1-1LZ that will act as a virtual switch.

The Leviton VP0SR-10Z does not have a LED indicator. For that you will need to upgrade to the Leviton VP0SR-1LZ.

Like all most of the Leviton Vizia RF+ series, the VP0SR-10 comes in white, but also ships with replacement ivory and almond replacement switches in the box.

Brand: Leviton

Hi Laith, I know we already spoke on the phone about this but I just wanted to chime in here as well for anyone else that may run into this problem. As Frank mentioned below, the VP0SR-10 only works as the coordinating switch for a main VRS15-L1Z switch so it would be used in a 3-way application and won't work for a single pole application.
I'm trying to install this (Leviton VP0SR-10Z) as a single pole application, and it's not working right. I'm replacing a switch in the wall that turns on a single light. I wired the Leviton switch using black for power, red for load, and green for ground. When I turn the circuit breaker back on, the light is on constantly and the light switch doesn't function. Also, when I try to pair the switch with the Lynx 5200 (with z-wave module), the switch is not found. What do you think I'm doing wrong? Please see attached image for my wiring configuration. Thanks, Laith
Thanks Sterling. I just ordered ordered the switches. I've waited a long time to get these installed, and it'll be nice to have light automatization when we go on vacation this summer.
This is a 3-way slave so you will need a master dimmer (i.e. https://www.alarmgrid.com/products/leviton-vri10-1lz ) or switch (i.e. https://www.alarmgrid.com/products/leviton-vrs15-1lz ).
Yes, it does work with the Honeywell LYNX Touch systems if you have the L5100-ZWAVE module installed.
Does this switch (Leviton VP0SR-10Z) work with the Lynx 5200? I want to use it for several lights in the house, including some 2-way lights. I already have the z-wave module installed. Thanks, Laith
* Based on a 10% APR with 12 months financing. APR's will vary between 10% - 30% based on credit score and various factors.