The Telguard ACD-100 is a low loss, high performance cable in a 100-foot length. It is suitable for use with any LTE cellular alarm communicator, and is provided by Telguard for their EXDL-0 and HGDL-0 antennas when used with the TG-1B, TG-4, and TG-7 Series communicators. It comes with installation hardware included.
Cellular alarm communicators have a built-in antenna, Telguard units included. However, there are times when you must mount the communicator in a location where cellular signal strength and/or quality is not adequate. When that is the case, an external antenna is used to resolve the issue. When running wire from the antenna to the communicator, you want to use only as much wire as is necessary, and no more. Telguard has provided this pre-cut cable, with the hardware connectors already installed. In addition to the ACD-100 they also offer the ACD-12, ACD-35, and ACD-50 in 12', 35', and 50' lengths respectively. You can choose either the Telguard EXDL-0 Omnidirectional antenna, or the Telguard HGDL-0, High Gain directional antenna.
In addition to being directly compatible with the above referenced communicators, the ACD-100 can also be used to extend the antenna for the Telguard TG-1 Express. The TG-1 Express has a different type of connector for the antenna. For those communicators, you must use a Telguard CTXL-12 to connect to the LTE communicator, then you can extend that wiring by using the ACD-12, ACD-35, ACD-50, or ACD-100.