2GIG Edge: Resetting the Installer Code

2GIG Edge: Resetting the Installer Code


Related Products

2GIG Edge w/ Verizon LTE - Wireless Alarm Control Panel
2GIG Edge w/ Verizon LTE
Wireless Alarm Control Panel
List Price: $568.00
Our Price: $313.99
2GIG Edge w/ AT&T LTE - Wireless Alarm Control Panel
2GIG Edge w/ AT&T LTE
Wireless Alarm Control Panel
List Price: $568.00
Our Price: $313.99

Description

In this video, Michael from Alarm Grid shows you how to reset the Installer Code on the 2GIG Edge Security System. The default Installer Code for a 2GIG Edge Alarm Panel is 1561. Alarm Grid recommends keeping this code at the 1561 default so that you can use it to get into programming without running into any issues. Even if you forget this code, you can always look it up later. But if you change the code, then you won't be able to look it up, and if you forget the changed code, then you won't be able to get into system programming.

There are two (2) main ways that you can change the Installer Code on the 2GIG Edge back to the 1561 default. In either case, you must know the system's current Installer Code. The first way to reset the code is to just manually change the code to 1561. Unlike other system codes, the Installer Code is not changed in the Users menu. Instead, you must access System Configuration. The very first programming field in System Configuration (Q101) is the option to change the Installer Code. You do not need to click save or anything after entering a new code at this menu. You can just back all the way out to the home screen, and the new code will be in effect.

Alternatively, you can also perform a factory default of the Users setting to get the Installer Code to revert to 1561. If you perform a default in this way, then any added user codes will be cleared from the system. Additionally, the system's Master Code will also be reset to its factory default of 1111. Make sure to change the Master Code to something else afterwards, as keeping the Master Code at its 1111 default is a major security risk.

https://www.alarmgrid.com/faq/how-do-i-reset-the-installer-code-on-a-2gig-edge-security-system

http://alrm.gd/get-monitored


Transcript

Hi, DIYers. This is Michael from Alarm Grid. And today, I'm going to be showing you how to reset your installer code, for 2GIG EDGE security system, back to its factory default of 1561. And we actually recommend keeping the installer code at its default of 1561, because keeping it at this code, it's not a security risk. You can't disarm with this code. It's just used for getting into programming. So even if you forget this code, you forget this default 1561, you can always go and look it up later. So it's just an easy option. So if worse comes to worse, oh no, I forgot my code, I can go and look it up, on Alarm Grid, hopefully. And you can rediscover what the code is. So it's just really recommended. Like I said, not a security risk, just really good to do. So we're going to go and show you how you default the code. And there's actually two ways that you can perform the reset of the code to 1561. You can go and manually change it, which is what I'm going to show you first. And then you can also do a user settings factory default, which will reset the code along with a few other things. And I'll talk about that when I get there. But first of all, let's show you the basic way, just if I wanted to just change the installer code, nothing more. One interesting thing, it's not in the user's menu. A lot of people will get lost, and they're not going to be able to find it, because it's not along with the rest of the users, like the master users, any other users that you've added. It's in a different spot. So I'm going to show you how to get there. It's actually question 101 of advanced programming. I think I got that menu right, but we'll see the actual name as I get into it. So anyway, we're at the main screen of our 2GIG EDGE. We're going to press the Settings icon at the bottom right corner. And then, we need to provide a code. So we actually need to provide our installer code. To change your installer code, you need the current installer code. If you don't have the current installer code, you're not going to be able to do this, because you need to get into the Installer Toolbox. So we'll do 1561. Ours is at the default. And now, I'm going to show you the first way to change the code manually. You see there is a user's menu, but that's not what we want. We want to go down to Installer Toolbox. And we have to do the regulatory statement. Apparently, this is our first time going in. If this is your first time going in, you'll see this as well. And we have to scroll through it because otherwise the Agree button won't be illuminated. So we did that. We'll press Agree. And so what we're going to do, we're going to go into Panel Programming, and we're going to go into Advanced Programming. And we're going to go into System Configuration, and you see right there, question 101, Enter Installer Code. That's what we want. That's what we're going to be changing right here. So I'm going to change the code. I'll change it to 2222, for our purposes. And kind of one off thing about the EDGE, it doesn't give you any confirmation that you did it. There's no Save button. There's no, you've changed your code successfully, or anything. But I did indeed do it. I can back out now. If I go back in, you'll see it stays at 2222. So if I back out all the way-- System disarmed. Ready to arm. --into the Settings menu, trying to get in, let's see what happens if I do 1561, the default installer code. Invalid access code. I changed the code, it doesn't work. So let's try the code that I changed it to, 2222. That got me in. So you see that the installer code was successfully changed. Now, the other method for changing the installer code is to do a factory default of the user setting. So that's what I'm going to do here. Again, you have to have the installer code to get into this menu. You're not going be able to access it if you just have the master user. And so what we're going to do, we're going to use Installer Toolbox. Actually, I'll start from beginning, I'll start from the very beginning, just so there's no confusion of how to get there. So we're at the main screen of the 2GIG EDGE. We're going to choose the Settings icon. We're going to enter in our current installer code. We changed ours to 2222. Remember, it's usually 1561. That's what you should keep it at. And so there's an option down here, Installer Toolbox. And then we can choose Restore Defaults. And this is where the action is going to happen. This is where we're going to do it. So you see we have a variety of options here. The only one that we need to toggle green and enable, is Users. We need to get that one on. And so, when I press Restore and then confirm it, it's going to do the Users default. Now, what does that mean? A few things are going to happen. It's not just going to reset the installer code. It's going to reset the master code back to 1111. It's going to clear out any users that you've added. If you added more user codes, they're all going to be cleared. You're going to have to reprogram them if you want to continue using them. And of course, for our purposes, it's going to reset the installer code back to 1561. So it's going to do quite a few things there, but this is a bit loaded. So if you only just want to change your installer code, changing it manually, the first process I showed you might be the preferable option. But this one works too. And you can perform other defaults while you're here, if you want to, if you want to clear out your system and get rid of your sensors and zones and reprogram everything, make a fun weekend project, you can go and do that. You can do the network reprogramming, you can set up your Wi-Fi conection, do whatever. But Users has to be enabled. Users is the one that has to be on. The others, they're all optional. So we have Users enabled. And we're going to choose Restore, and then it's going to ask us to confirm. We are going to press the red Restore button, and it's going to be restoring the settings. So we'll wait for that. Settings have been restored to factory default, so we're good to go. So we're going to press OK. And now I'm going to get out of program, go back to the home screen. And I'm going to try to get into programming here. So let's see, we had 2222 as the code. Let's see what happens if I try that. Invalid Access Code. It's not the code anymore, it's restored to the default. So now, if I try 1561, which is the factory default, that got me into programming. I can go into it and-- I don't necessarily want to [INAUDIBLE].. But I can go into Installer Toolbox. And it actually makes me redo the regulatory statement, which is kind of interesting in itself, because I reset everything. It has to, for liability reasons, show me this. And so I have to scroll through it, and I press Agree. And I can get back in, I can get back to the defaults menu if I want to. I can go anywhere I want. That's not-- that looks like a Return button, but it's not. This is the Return button. So I can do Panel Programming, and I can do Advanced Programming, I can go into the System Configuration. Now, I can change the installer code there again. You see, it changed back to 1561. But I'm going to get back to the home screen. We're just going to repeatedly press the small bar-- System disarmed. Ready to arm. --return arrow in the upper right corner. And we're going to let it say its thing. And so we have restored the installer code back to its default of 1561. Now, remember that we recommend always keeping this code at 1561. If you forget it, you can look it up later. If you somehow hurt your head and lost memory of your code, you would know to look it up, and you would be able to get back in. I know even 1561 is a bit of a random number in itself, but that's what it is, and it's a great way to get into programming, because you can always look it up if you need to. So and remember, it's not a security risk. I can't arm or disarm the system with the code. Let me show you that real quick. If I arm stay, I go to disarm, 1561, doesn't get me in. Access Not Authorized. That doesn't work. You know what, if I ever try another code that doesn't work, let's see if I did 7777. That says Invalid Access Code, different message. So it acknowledges that that was a correct code, but it didn't let me in. But our master code is at the default. So we'll do that, 1111. System disarmed. Ready to arm. And there we go, we just armed our system. But that is how you reset the installer code back to the default of 1561. If you have any questions about the 2GIG EDGE alarm system, or about alarm monitoring services, send an email to support@alarmgrid.com. If you found this video helpful, make sure to give it a thumbs up below to like the video. And remember to subscribe to our channel for updates on future videos. We hope you enjoyed the video. Thank you.


Uploaded