2GIG RPTR1-345 Wireless Repeater - Dealer Data Sheet

Related Products

Honeywell Lyric Controller - Encrypted Wireless Security System
Honeywell Lyric Alarm System
Encrypted, HomeKit, Wireless Security System
2GIG RPTR1-345 - Wireless Repeater
2GIG RPTR1-345
Wireless Repeater
List Price: $118.00
Our Price: $81.99
2GIG GC3 - DIY Wireless Security System w/ 7" Screen
DIY Wireless Security System w/ 7-inch Screen
2GIG CP21-345 - Front
Go!Control Wireless Security System

Related Categories

Document Transcript

Nortek Security & Control is pleased to announce the
availability of the new 345MHz Wireless Indoor Repeater.
The 2GIG 345MHz Repeater will repeat 2GIG and Honeywell
sensor signals to 2GIG panels. By adding a Repeater
between the panel and sensor the system can get better
range and more reliable signals in difficult RF environments.
The Repeater is a plug and play device that will immediately
start repeating signals when powered on. The rechargeable
battery provides backup power in case of AC power loss.
345MHz Repeater
Model #: 2GIG-RPTR1-345
Product Names & Part Numbers
• Repeats 2GIG and Honeywell 5800 series signals on 345MHz frequency
• 24-hour backup battery included
• Repeat indicator in the signal eliminates “repeated signal storm”
• Optional zone programming to supervise Tamper, AC Loss, and Low Battery
• GC2: Requires FW v1.14 or newer
• GC3: Requires FW v3.1 or newer
The 2GIG Repeater MSRP is $93.02
Product Available, Ordering & Shipping Information
Orders for the new 2GIG Repeater will be accepted starting on October 10,
2016 and orders will start to be fulfilled November 21. Dealers should check
with distributors for availability.
The new 2GIG Repeater will ship with a standard 2 year limited warranty.
Please refer to the Install Guide for specific warranty details.
Q. What signals does the 2GIG Repeater repeat?
A. The 2GIG Repeater will repeat 2GIG and Honeywell signals
Q. Does the 2GIG Repeater use a zone in the system?
A. The Repeater can be plugged in and will start repeating signals without
any programming. If you want to supervise Low Battery, Tamper, and AC
Power Loss then it needs to be programmed in as a zone.
Q. Can I put more than one Repeater on a system?

A. Yes you can put more than one Repeater on a system. The Repeater
adds a repeat indicator to the signal to eliminate a “repeated signal storm”
Q. Does the Repeater work on GC2 and GC3?
A. The Repeater will work on GC2 with FW v1.14 and newer. For GC3 it can
be used immediately but will not be able to be supervised until FW v3.1.
GC2 Wireless Indoor Repeater
UPC: 817082011455

Please visit
, or contact your local Sales Manager
P/N 10014050A
© 2016 Nortek Security & Control LLC. All Rights Reserved
1950 Camino Vida Roble, Suite 150 • Carlsbad CA 92008 • 760.438.7000 • 800.421.1587