DSC PGP9920

The DSC PGP9920 is the wireless repeater for PowerG Sensors and PowerG automation devices. This PowerG + device works by taking the signal sent by a PowerG+ sensor, extending it, and sending it out to the panel. This effectively doubles the range of the device. It is compatible with Powerg+ and PowerG alarm panels.

The DSC PGP9920 is a wireless repeater that helps boost the range of your PowerG+ security system. It works by receiving signals from PowerG+ devices like sensors and then sending those signals to your control panel. This keeps communication strong, even in large homes or buildings where signals may need help reaching far distances.

The PGP9920 is simple to install and works with PowerG+ enabled panels that have been upgraded to firmware 4.6.1 or higher, including the IQ Panel 4, IQ4 NS, and IQ4 Hub. It can also connect with older PowerG panels and the IQ Pro, in a fallback or legacy mode. With PowerG+ technology, the repeater offers secure, two-way communication that’s hard to block or interfere with.

This repeater includes both front and back tamper detection, so if someone tries to open or move it, the system will alert you. It has LED lights that help you check signal strength and diagnose problems during setup. You’ll also see indicators for power status and device activity.

The PGP9920 runs on AC power, but it also comes with a rechargeable battery that keeps it working for up to 48 hours during a power outage. It will report if the power goes out, so you always know the system status. The repeater also supports over-the-air firmware updates, which means it can stay current without needing to be replaced.

If your PowerG+ devices need a boost to stay connected, the PGP9920 is a smart and easy solution for keeping your security system strong and reliable.

Specifications

• Device type: Wireless repeater and range extender
• Technology: PowerG+ two-way encrypted wireless
• Power source: AC power with 48-hour rechargeable backup battery
• LED indicators: Power, activity, signal quality, diagnostics
• Tamper detection: Front and back cover protection
• Communication: Relays signals between PowerG+ devices and panel
• Installation: Wall mount; easy signal testing with visible LED
• Firmware updates: Over-the-air capable
• Compatible systems: IQ Panel 4, IQ4 NS, IQ Hub 4.6.0, IQ Pro 4.4.0, and PowerG panels in legacy/fallback mode