Optex FL-60N

The Optex FL-60N Long-Range Lens allows you to adjust the coverage area for a Optex WNX-40 Series Motion Sensor so that it covers a long, narrow area. All you have to do to install is swap out the existing stock motion sensor lens and apply the long-range Optex FL-60N in its place.

The Optex FL-60N is compatible with the following motion detecting sensors:

• Optex WNX-402G (433 MHz for 2GIG Systems)
• Optex WNX-40DS (345 MHz for DSC Systems)
• Optex WNX-40HW (345 MHz for Honeywell Systems)
• Optex WNX-40IX (319.5 MHz for Interlogix Systems)

By using the Optex FL-60N, the max coverage area for your motion sensor will become 60 feet by 6 feet. This is good for the long range detection that is needed for hallways and other narrow areas. Please note that the standard range for these motions with the stock lens is 40 feet by 40 feet. So you really only want the FL-60N if you need to cover a longer, more narrow area. Remember, you can also adjust the sensitivity for these sensors by increasing or decreasing the pulse count.