If you're looking to control your magnetic low voltage lights with Z-Wave, then look no further than the Leviton VRMX1-1LZ dimmer.
This is not for use with high/standard voltage incandescent and fluorescent light bulbs. For those, you can use the Leviton VRS05-1LZ and Leviton VRS15-1LZ, respectively.
The Leviton VRMX1-1LZ can be used in single pole, 3-way and other multi-pole situations to have multiple light dimmers control one set of magnetic low voltage lights.
However, you cannot use standard switches on the same circuit as the VRMX1-1LZ. If your circuit is properly wired for 3-way using a traveler wire, you can pair with a Leviton VP00R-1LZ or Leviton VP00R-10Z. If you do not have existing 3-way lighting wires run, you must use a matching controller like the Leviton VRCZ1-1LZ.
The VRMX1-1L is rated to handle up to 1000 watts of magnetic low voltage lights and has a built in LED indicators to indicate level of dimmer.
Like the rest of the Leviton Vizia RF+ series, this Magnetic Low Voltage Dimmer speaks Z-Wave and when combined with a Z-Wave controller like a LYNX 5100 with ZWAVE module or Honeywell Tuxedo Touch, can be controlled by your alarm system!
The VRS15-1LX comes with interchangeable white, ivory and almond colored switches.