Qolsys IQ Stand (QR0096-840)

The Qolsys IQ Stand (SKU: QR0096-840) is perfect for desktop installation of the IQ Remote PowerG and the IQ Hub (1st Generation). Mounting with the IQ Stand will place the panel/keypad at the perfect viewing angle on a desk, counter, or table. If you are in a situation where you can't mount the IQ Hub to a wall, the IQ Stand is perfect for you.

Important Note: This stand is only compatible with the IQ Remote-PG keypad and the original Qolsys IQ Hub. It is not compatible with the original IQ Remote. It is also not compatible with the newer IQ4 Hub.

Whether you live in an apartment or other rental property where you aren't free to make holes in the walls, or you just prefer to mount your IQ Remote PowerG or IQ Hub on a kitchen counter or desk, the IQ Stand is the perfect mounting choice. The only tool required to install the IQ Stand is a screwdriver. This is used to tighten the touchscreen's locking screw into the stand.

To install the desk stand, turn the IQ Remote PowerG or IQ Hub over. Align the four (4) tabs on the desk stand into the four (4) holes in the back of the device. With all four tabs lined up, press the table stand forward so that the tabs are inserted into the holes, then push the stand up toward the top edge of the IQ Remote PG/Hub, making sure that all four (4) tabs lock into place. Route the power wire through the large hole in the back of the stand and plug the barrel connector into the panel or keypad. Finally, tighten down the top screw so that the desk stand can't be easily removed from the back of the security device.

As mentioned above, this particular stand is also only compatible with the IQ Remote PowerG version and not the IQ Remote (WIFI only) version. The WIFI model comes with an included table stand. This particular IQ Stand is also only compatible with the first-generation IQ Hub, not the Qolsys IQ4 Hub. The IQ4 Hub uses the same desk stand as the IQ Panel 4, and it can be found here