How Many Partitions Can I Have On A Vista 10P?
The Honeywell Vista 10P control panel has 1 partition and has many features of the larger Vista series control panels.
The Vista 10P control panel has 6 on board hardwired zones and 16 wireless expansion zones, providing a total of 22 protection zones. The Vista 10P also has 8 keyfobs zones allowing 2 of them to be programmed without using any of the 22 protection zones. Zone doubling and hardwire zone expansion modules are not supported on the Vista 10P. To utilize keyfobs and wireless devices, the Vista 10P must be paired with an RF keypad or a wireless receiver. The Vista 10P supports up to 8 alpha keypads, some examples; 6150, 6150V, 6150RF, 6160, 6160V, 6160RF, 6162, 6162V and the 6162RF. . The VISTA-10P does not support AUI device addresses and therefore you cannot add graphic touchscreen keypads like the 6280 or the Tuxedo Touch WiFi. To have full access to the programming menus of the VISTA-10P, an alphanumeric alarm keypad such as the 6160 is required. The Vista 10P has a 32 event log and supports up to 16 user codes. The Vista 10P provides several options for communication. GSM cell communicators, GSMV4G and the GSMX4G. The internet communicator 7847i and dual communication the iGSMV4G. Users can also connect a standard land line for main communication or as back up to a cell or internet communicator. The Vista 10P supports up to 4 relay modules to activate other equipment or devices.
The Vista 10P control panel is ideal for small businesses and residential applications.
Did you find this answer useful?
We offer alarm monitoring as low as $10 / monthClick Here to Learn More
- Answered By
- Connie Michael