Programmable Thermostats Frequently Asked Questions

How Do I Set an ADC-T2000 Back to Factory Default?
The ADC-T2000 follows a special defaulting process that involves putting the unit in OFF mode, and then entering a specific set of commands. Learn to factory reset the ADC-T2000.
Added:

How Do I Set an ADC-T2000 Back to Factory Default?
The ADC-T2000 follows a special defaulting process that involves putting the unit in OFF mode, and then entering a specific set of commands. Learn to factory reset the ADC-T2000.
Added:

How Do I Adjust the Heat and Cool Setpoint Ranges On the ADC-T3000?
The setpoint ranges for the ADC-T3000 restrict the temperature values that can be set on the thermostat. Learn to adjust the heat and cool setpoint ranges for the ADC-T3000.
Added:

How Do I Adjust the Heat and Cool Setpoint Ranges On the ADC-T3000?
The setpoint ranges for the ADC-T3000 restrict the temperature values that can be set on the thermostat. Learn to adjust the heat and cool setpoint ranges for the ADC-T3000.
Added:

How Do I Use Emergency Mode for Auxiliary Heat On the ADC-T3000?
When the ADC-T3000 Thermostat is in its Emergency Mode, it will only use Auxiliary Heat, and not the heat pump. Learn how to activate Emergency Mode on an ADC-T3000 Thermostat.
Added:

How Do I Use Emergency Mode for Auxiliary Heat On the ADC-T3000?
When the ADC-T3000 Thermostat is in its Emergency Mode, it will only use Auxiliary Heat, and not the heat pump. Learn how to activate Emergency Mode on an ADC-T3000 Thermostat.
Added:

How Do I Set Up Thermostat Temperature Notifications for Alarm.com?
Alarm.com thermostat notifications can be set up through the Alarm.com website. These notifications are called Temperature Alerts. Learn to set up Alarm.com Temperature Alerts.
Added:

How Do I Set Up Thermostat Temperature Notifications for Alarm.com?
Alarm.com thermostat notifications can be set up through the Alarm.com website. These notifications are called Temperature Alerts. Learn to set up Alarm.com Temperature Alerts.
Added:

How Do I Factory Default an ADC-T3000?
Any ADC-T3000 that receives a factory default must be reconfigured from scratch. Do not default unless the unit is cleared from the Z-Wave network. Learn to default the ADC-T3000.
Added:

How Do I Factory Default an ADC-T3000?
Any ADC-T3000 that receives a factory default must be reconfigured from scratch. Do not default unless the unit is cleared from the Z-Wave network. Learn to default the ADC-T3000.
Added: