Wireless Alarm Systems Frequently Asked Questions

How Do I Change the Installer Code On a Honeywell L5100?
Alarm Grid does not advise changing the Installer Code on an L5100 from its default of 4112. This prevents you from being locked out of programming. Learn about Installer Codes.
Added:

Can I Replace My Wireless Security Panel?
It is certainly possible to replace your wireless system with a new one. You might not even have to redo your panel programming. Find out about replacing your wireless panel.
Added:

What Is a Security System
The main components of an alarm system are sensors and a control panel. The system will send out distress signals during alarm events. Find out what an alarm system is.
Added:

How Do I Deactivate My Alarm System?
You must deactivate your system with your existing alarm company if you want to bring it to a new company. New equipment may be needed. Learn how to deactivate your alarm system.
Added:

Why Would I Want a Wireless Alarm System Over a Wired Alarm System?
Most DIY users will ultimately want a wireless system over a wired one. Wireless systems are easier to install and use on a daily basis. Find out why wireless systems are great.
Added:

What is the Cost of Wired Systems vs Wireless Systems?
There isn't much difference in terms of cost between wired and wireless systems. Wired panels might seem cheaper, but they need more add-ons. Learn about the cost of alarm panels.
Added:

How Do You Delete a Honeywell Wireless Device?
First, enter zone programming. Next, set the zone type to "Not Used". Finally, confirm you want to delete the zone. Learn how to delete a wireless device from the system.
Added:

Can I Change The Date/Time On A Lyric Security System?
To change the date and time on a Honeywell Lyric Controller, access the Date Time Menu in the Master Tools Menu. Learn to change the date and time for a Lyric System.
Added:

Which Systems Can Alarm Grid Take Over?
Alarm Grid will support any alarm system that we can take over. To take over a system, the user may need to know the panel's Installer Code and/or Master Code. In some situations, the user will need to replace the system's communicator. Learn more about what systems we can take over.
Added:

Which Systems Can Alarm Grid Take Over?
Alarm Grid will support any alarm system that we can take over. To take over a system, the user may need to know the panel's Installer Code and/or Master Code. In some situations, the user will need to replace the system's communicator. Learn more about what systems we can take over.
Added: