Qolsys IQ Panel 4 AT&T LTE, Honeywell/2GIG Compatible Frequently Asked Questions
How Do I Add the Zigbee Daughtercard to the IQ Panel 4?
Properly power down the panel. Expose the back side of the board. Insert the Zigbee card in the proper slot. Replace the cover and apply power. Click for more!
How Do I Set Up a Qolsys IQ Lock-PG Automated Lock?
Install the lock hardware as per the instructions. Once the hardware is installed, put the IQ4 Panel into Auto Learn and power on the lock. Read on for details.
How Do I Reset The Installer Code On Qolsys IQ Panel 4?
The Installer Code can be edited by the Dealer Code, by itself, or by an Alarm Dealer through the Alarm.com Partner Portal. Click here for the full details.
Can I Add A High-Current, Wired Siren to An IQ Panel 4?
One or more wireless sirens can be added to any IQ Panel 4. The DSC WS9WLSHW8 or the Qolsys Hardwire 16-F can be used for a wired siren. Click for details.
How Do I Add A Hardwired Zone To My Qolsys IQ Panel 4?
To add a hardwired zone to a Qolsys IQ Panel 4, you will need a wired-to-wireless conversion device. Click the link to find out how hardwired zones can be used.
How Do I Find the IMEI Number of A Qolsys IQ Panel 4?
The IMEI number is located on the packaging, the panel's back, and is accessible via programming. Keep reading to see how you can locate this important number.
Can I Connect The Qolsys IQ Panel 4 To IP Monitoring?
You can connect the Qolsys IQ Panel 4 to WIFI for IP monitoring, however, you must register it for cellular communication also. Read on for IQ Panel 4 details.
Does the Qolsys IQ Panel 4 Support The Use of Prox Tags?
Yes, with the correct keypad, the IQ Panel 4 can support the use of prox tags for arming and disarming. Click the link to keep reading, for all the details.
How Do I Use SmartStart to Enroll Z-Wave on an IQ Panel 4?
Choose SmartStart in the Z-Wave device installation menu, and scan the QR code. Turn on the Z-Wave device. Keep reading for a full SmartStart walkthrough.
What Kind Of Wire Do I Need For A Qolsys IQ Panel 4 Installation?
The wire needed depends on the install. If you will use wireless sensors and the included power wire, then no more wire is needed. Keep reading for details.
Properly power down the panel. Expose the back side of the board. Insert the Zigbee card in the proper slot. Replace the cover and apply power. Click for more!
Added:
How Do I Set Up a Qolsys IQ Lock-PG Automated Lock?
Install the lock hardware as per the instructions. Once the hardware is installed, put the IQ4 Panel into Auto Learn and power on the lock. Read on for details.
Added:
How Do I Reset The Installer Code On Qolsys IQ Panel 4?
The Installer Code can be edited by the Dealer Code, by itself, or by an Alarm Dealer through the Alarm.com Partner Portal. Click here for the full details.
Added:
Can I Add A High-Current, Wired Siren to An IQ Panel 4?
One or more wireless sirens can be added to any IQ Panel 4. The DSC WS9WLSHW8 or the Qolsys Hardwire 16-F can be used for a wired siren. Click for details.
Added:
How Do I Add A Hardwired Zone To My Qolsys IQ Panel 4?
To add a hardwired zone to a Qolsys IQ Panel 4, you will need a wired-to-wireless conversion device. Click the link to find out how hardwired zones can be used.
Added:
How Do I Find the IMEI Number of A Qolsys IQ Panel 4?
The IMEI number is located on the packaging, the panel's back, and is accessible via programming. Keep reading to see how you can locate this important number.
Added:
Can I Connect The Qolsys IQ Panel 4 To IP Monitoring?
You can connect the Qolsys IQ Panel 4 to WIFI for IP monitoring, however, you must register it for cellular communication also. Read on for IQ Panel 4 details.
Added:
Does the Qolsys IQ Panel 4 Support The Use of Prox Tags?
Yes, with the correct keypad, the IQ Panel 4 can support the use of prox tags for arming and disarming. Click the link to keep reading, for all the details.
Added:
How Do I Use SmartStart to Enroll Z-Wave on an IQ Panel 4?
Choose SmartStart in the Z-Wave device installation menu, and scan the QR code. Turn on the Z-Wave device. Keep reading for a full SmartStart walkthrough.
Added:
What Kind Of Wire Do I Need For A Qolsys IQ Panel 4 Installation?
The wire needed depends on the install. If you will use wireless sensors and the included power wire, then no more wire is needed. Keep reading for details.
Added: